Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Borough Park
If the chimney on your Borough Park building is losing mortar, showing white bloom stains on the brick, or letting water into a shared boiler stack, you’ll want a clear answer on what’s wrong before anyone touches it. We’re a chimney-only specialist, not a general contractor, and we handle chimney repair for the multi-family brick buildings that make up most of this neighborhood. Whether you’re near the 13th Avenue shopping stretch, off New Utrecht Avenue, or in the blocks around 50th Street, the work starts the same way: a camera inspection, a photo report you can hold onto, and a flat price agreed before anything is booked. Call (855) 551-0049. We answer 24/7, with dispatch from 7am to 7pm, Sunday through Friday.
Why Borough Park Homeowners Call Chimney Sweep Bay Ridge for Chimney Repair
Most chimney problems in Borough Park live in the masonry stack, not in a fireplace. We understand that before we climb anything, and it changes what we look for. A single stack on a four-story brick building here may vent a high-efficiency boiler alongside older clay-tile flues, so the inspection has to account for how all of them interact: draft, liner condition, and where water is getting in. That’s a different job than the single-flue fireplace work that dominates neighboring suburbs, and it’s the job we do.
We’re a dedicated chimney company covering the full lifecycle: sweep, inspection, cap and crown, chimney repair, and fireplace repair. One company inspects and then repairs, so there’s no handoff gap where a mason blames the liner and a liner installer blames the mason. Our technicians have up to 11 years of experience, and we work with professional-grade materials from a curated roster: HeatShield, Gelco, Olympia Chimney, Famco, Copperfield, and DuraFlex. What we recommend is tied to what the camera shows, not to what’s convenient to sell. If a repair can safely wait a season, we’ll tell you.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Borough Park
Brick chimneys in this neighborhood take a beating. Cold, damp winters and humid summers push moisture into exterior masonry, and freeze-thaw cycles open up mortar joints and pop brick faces. Here’s how we address the parts that fail most often in Borough Park.
Mortar Repointing
When mortar joints between courses of brick erode, water gets behind the brick face and starts working on the flue inside. Repointing restores those joints with mortar matched to the hardness of the original brick, so the brick isn’t damaged by a repair that’s stronger than it is. On the attached brick rows common in Borough Park, we cut out the failed joint rather than smearing new mortar over the top.

Spalling Brick Repair
Spalling is what happens when water freezes inside a brick and pushes its face off. Left alone, spalled brick keeps shedding and lets more water in. We replace the damaged units with brick matched to the building, then address the source of the water. On a shared stack, one failing face can compromise the whole assembly, so we check the neighboring courses while we’re there.

Chimney Waterproofing
A breathable masonry waterproofing applied to exterior brick stops liquid water from soaking in while letting vapor escape. That matters in Borough Park’s freeze-thaw climate, because a sealer that traps moisture causes worse spalling than no sealer at all. We apply it after any repointing or brick repair is finished, not before.

Flashing Repair
Most water that gets around a chimney enters at the flashing, where the chimney meets the roof. Failed flashing lets water run down the outside of the flue and into the building’s interior masonry. We repair the flashing at the roof line and check the crown above it, since the two points of intrusion tend to fail together.
Trusted Brands We Service in Borough Park
We install with professional-grade components that generalist contractors rarely spec: DuraFlex flexible liners where a shared flue has bends or offsets, HeatShield for ceramic resurfacing where a clay liner is cracked but still structurally sound, and Olympia Chimney and Gelco components for caps, crowns, and liner hardware. We don’t claim to stock parts locally; what we do is specify the right material for the condition the camera finds, then schedule the repair once a flat price is agreed.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Borough Park Homes
- Deferred mortar repointing on exterior brick chimneys. Failed joints let water into the stack, and that water then attacks the flue liners in shared boiler stacks. What looks like a cosmetic problem on the outside is often a liner problem on the inside.
- A boiler flue cleaning mistaken for a fireplace sweep. In a multi-family building, the flue that actually needs attention is usually the one venting the boiler, not a decorative fireplace. Early signs of cracked clay tile, like subtle changes in draft, go unnoticed until a Level 2 inspection with a camera catches them.
- Third-degree creosote glaze in oil-fired boiler flues. Hard, glazed creosote can’t be brushed away; it needs chemical treatment or relining. Without a camera inspection, it’s easy to miss and assume a routine sweep took care of it.
- Mixed vintages in a single stack. Many chimneys here vent a high-efficiency boiler alongside older flues in the same masonry column. The interface between new and old is where failures concentrate, and it’s the first thing we look at on a multi-family inspection.
Pricing for Chimney Repair in Borough Park, NY
Repair prices here are set per job by a written estimate, and the estimate is free. Typical estimated ranges for Borough Park’s market run roughly as follows:
| Repair | Typical estimated range |
|---|---|
| Mortar repointing, section of exterior chimney | $450 – $1,200 |
| Spalling brick repair, per area | $600 – $1,800 |
| Masonry waterproofing | $350 – $900 |
| Flashing repair | $300 – $800 |
| Chimney rebuild above roofline | $2,500 – $6,000 |
| HeatShield flue resurfacing (shared stack) | $1,200 – $2,800 |
Scope, height, access, and how many flues the stack serves drive the number. The written estimate sets the final price, and nothing gets recommended without camera evidence you can see in the photo report.
We Also Serve Cities Near Borough Park
The same chimney repair work covers the neighborhoods around us: Sunset Park, Kensington, Dyker Heights, and Bensonhurst. If your building sits on the edge of Borough Park and the next neighborhood over, we’ll still come out and give you a straight read on the chimney.
Serving Borough Park, NY – Our Local Coverage Area
We serve Borough Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Borough Park
Once a year is the right starting point for a boiler flue in a multi-family building, and sooner if you notice draft changes. Because a shared stack vents several flues, small liner cracks can go unnoticed until an annual Level 2 inspection catches them.
It shows the inside of each flue, the condition of the clay liner, any creosote glazing, and where the flues meet in the stack. You get the photos, not just a verbal description, so you can see the same evidence the technician sees.
Sometimes yes. If the camera shows intact liner and the mortar is sound, we’ll say so and recommend a recheck rather than a repair. If the liner is cracked or the mortar joints are open, waiting risks water damage and carbon monoxide problems, and that’s worth addressing before the next heating season.
Repointing replaces the failed mortar joint with new mortar matched to the brick; tuckpointing goes a step further by adding a contrasting mortar line for a sharper appearance. For most repair-focused work on Borough Park’s exterior brick chimneys, repointing does the job; tuckpointing is a finish decision more than a structural one.
It’s set from the inspection findings and a written scope, agreed before any work is scheduled. You see the range, the specific repair, and the final price on paper, and that estimate is what the job costs.
Whether you’re next door to a neighbor on 13th Avenue or anywhere else in Borough Park, the first step is the same: a camera inspection, a photo report, and a flat estimate. Call (855) 551-0049 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bay Ridge.