Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Borough Park
If you own or manage a brick building in Borough Park, the chimney on your roof probably isn’t venting a fireplace. It’s venting a boiler, and often one that serves several apartments at once. That changes what a sweep should look like, and it’s the reason we treat a Borough Park chimney as a stack to be inspected end to end, not a firebox to be brushed out. Our chimney sweep service starts with a camera look at the flue, a flat price agreed before we book, and a photo report you can read for yourself. We serve Borough Park and the buildings along the blocks near 13th Avenue and 16th Avenue, and we know the terrain. Call (855) 551-0049 to set up a sweep.
Why Borough Park Homeowners Call Chimney Sweep Bay Ridge for Chimney Sweep
Borough Park is dominated by large multi-family brick buildings, many of them built or expanded after 1950, and the chimneys here mostly serve shared boiler flues. That means “chimney cleaning” in Borough Park usually means sweeping and inspecting a masonry stack that vents oil or gas boilers for several apartments at once. A single-story fireplace job, the kind you’d see in a suburban ranch, is the exception, not the rule. We built our Borough Park work around that reality.
We’re a chimney-only company. We don’t do roofing, HVAC, or general masonry, and that focus shows up in the questions we ask before we ever get on the roof. When a boiler services four or five apartments in one building, a small liner crack isn’t cosmetic. It’s a carbon monoxide path. We look for it with a camera, show you what we found, and tell you plainly when the work can wait.
Our technicians have up to 11 years of experience, and that experience is largely in exactly this kind of building: attached brick rows and apartment blocks with exterior masonry chimneys. We work with the professional brands that hold up in this climate – HeatShield for flue restoration, DuraFlex for flexible liner retrofits, and Olympia Chimney for a range of flue system parts. You get the same trained eyes whether you own a two-family on one of the quieter side streets or manage a multi-unit near 13th Avenue.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Borough Park
A proper Borough Park sweep isn’t one visit for one thing. It’s a sequence: inspect, document, clean, then talk honestly about what’s next. Here’s how we break it down.
Level 2 Inspection in Borough Park
For most Borough Park buildings, a Level 2 inspection is the starting point, not an upgrade. When a chimney serves a shared boiler flue, you can’t see what’s happening inside the masonry stack without a camera, and the camera is what a Level 2 adds. We check the flue liner, the smoke chamber, and the exterior mortar joints for the spalling that freeze-thaw cycles cause here in cold, damp winters. The output is a photo report of every defect we find, which you can review before we recommend a single repair.

Creosote Removal in Borough Park
Boiler flues don’t produce the same creosote as a wood-burning fireplace, but they do accumulate soot and hardened residue that can restrict draft and hide a failing liner. We remove what’s there with the right tools for the flue type, and if we find third-degree creosote – the glazed, hard stage that brushing alone won’t clear – we’ll tell you before we quote a price to address it. Most boiler flues here clean up without that complication, but you shouldn’t assume it either way.

Annual Sweep in Borough Park
An annual sweep is the baseline for any chimney, and in a multi-family building it’s also your once-a-year chance to catch a liner problem before it becomes a carbon monoxide problem. We schedule these around the end of the heating season, when soot and residue from a winter of boiler operation have settled. If your building was inspected last year and nothing was flagged, we’ll review that report and tell you whether another full sweep is warranted yet or not.

Soot Removal in Borough Park
Soot is the softer residue in a boiler flue, and it builds up faster than people expect in the tightly packed rows of attached brick houses here. Left in place, it reduces the flue’s effective diameter and can degrade the clay tile lining over time. Our soot removal in Borough Park gets the flue clean and lets us see the liner condition clearly on a camera – you can’t judge tile integrity through a layer of soot.
Trusted Brands We Service in Borough Park
Chimney brands matter more than most homeowners realize, because the wrong component for a flue configuration can mean a repair that doesn’t hold through a freeze-thaw winter. We’re authorized to work with professional chimney supply brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That gives us the range to specify the right part for the job rather than adapting whatever a general contractor has on hand. We don’t claim to stock these parts locally – we source what’s needed, when it’s needed, and we tell you the timeline up front so there’s no surprise on the roof. A cracked crown gets a Famco or Gelco component; a cracked liner might get HeatShield ceramic resurfacing instead of a full reline.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Borough Park Homes
- Shared boiler flues treated like fireplaces: A quick brush-down assumes there’s nothing to look at beyond the firebox. In a multi-family Borough Park building, the real risk is a cracked or separated clay tile liner letting carbon monoxide seep into the apartments – and only a camera inspection catches that.
- No fireplace, so no inspection: Plenty of Borough Park buildings have boiler flues and no hearth at all, so nobody thinks to look up at the chimney. That’s exactly how spalling brick and deteriorated mortar go unnoticed until a freeze-thaw cycle cracks something loose.
- Flat price quoted without seeing the flue: A sweep who quotes sight-unseen can’t know if your stack has a third-degree creosote layer, an offset flue, or a damaged crown. We confirm the configuration first so the price we agree is the price you pay.
- Freeze-thaw on exterior masonry: Cold winters and hot, humid summers in this part of NYC are hard on exterior brick chimneys. The mortar joint is usually the first place it shows, and it’s one of the most common things our camera work flags.
Pricing for Chimney Sweep in Borough Park, NY
We give actual numbers, because you shouldn’t have to guess. A typical annual sweep in Borough Park runs $150 – $275 for a straightforward boiler flue. Creosote and soot removal on a more heavily soiled stack often lands in the $200 – $350 range. A Level 2 inspection with camera and photo report is usually $150 – $300, and a chimney crown repair, when it’s needed, typically runs $300 – $600 depending on the size and condition of the crown. A full liner restoration with HeatShield or a DuraFlex reline is a bigger job, and we’ll only recommend it when the photo evidence shows you why. The written estimate sets the final price. Call (855) 551-0049 for a free estimate.
We Also Serve Cities Near Borough Park
Borough Park sits among neighborhoods with the same kind of attached brick housing, and we cover the surrounding areas – Sunset Park, Kensington, Dyker Heights, and Bensonhurst included. If you’re not sure whether your building falls within our service area, call and we’ll tell you straight. The building stock is similar enough across these areas that the inspection approach carries over, but the flue configuration in each building still gets checked on its own.
Serving Borough Park, NY – Our Local Coverage Area
We serve Borough Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Borough Park
Once a year is the practical baseline for a boiler flue in a Borough Park multi-family building, and that annual visit is as much an inspection as a sweep. The point isn’t just clearing soot; it’s checking the liner for the cracks and separations that let carbon monoxide into a building where several apartments share one stack. If your usage is light and last year’s inspection was clean, we’ll tell you when you can stretch the interval. When in doubt, call (855) 551-0049 for a free estimate.
A Level 2 inspection includes a camera look inside the flue to check the liner, smoke chamber, and interior condition, plus a visual check of the exterior masonry – and in Borough Park it’s necessary any time you’re dealing with a shared boiler flue you can’t see clearly from the top. It’s also the right call when a building changes hands or a new boiler is connected to an existing flue. We document what we find with photos so you have a record, not just a verbal opinion. Call (855) 551-0049 to book one.
Yes, once we’ve confirmed your flue configuration, we give you a flat price for the sweep before you book – and if the chimney needs more work, that becomes a separate item in your written estimate, not a surprise charge added to the sweep. The problem with prices quoted sight-unseen is that nobody has checked for third-degree creosote, an offset flue, or a damaged crown yet. We look first, then quote. The estimate is free; call (855) 551-0049.
Often yes, but it depends on what last year’s report actually showed and how much soot has built up since. A clean inspection a year ago is a good sign, but it doesn’t account for a winter of boiler operation or a freeze-thaw cycle on the exterior brick in the months since. If your report was genuinely clear and the flue vents a boiler you use regularly, it may be safe to wait a bit. We’d rather look than guess. Call (855) 551-0049 for a free estimate.
Call us soon if you notice soot stains or dark streaks on the chimney’s exterior, crumbling mortar or spalling brick, a whitish bloom on the masonry, or a boiler that’s been drawing poorly or producing a musty smell in the building. Any of these can point to a liner or crown problem, and in a shared-flue building that’s worth checking without delay. It’s not a reason to panic – it’s a reason to book a look. Call (855) 551-0049. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bay Ridge.