Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Gravesend
Chimney cap and crown work is how you keep water out of a Gravesend chimney, and we do both as a chimney-only specialist. A typical cap installment in Gravesend runs $185 to $420; a crown repair usually lands between $200 and $450, depending on the size and condition of the stack. Our technicians have up to 11 years of experience, and we know the look of these rooftops by now: low brick stacks, tight roof lines, the smell of a shared chimney that isn’t behaving. Call (855) 551-0049. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Gravesend Homeowners Call Chimney Sweep Bay Ridge for Chimney Cap & Crown
Gravesend has a building pattern we see more than almost anywhere: long rows of attached brick semis built between the 1920s and 1950s, each sharing a chimney stack or a party wall with the neighbor. That single detail changes how a cap or crown job has to be handled. We don’t sell the work off the back of a quick look at one roof. The local pro documents both sides of a shared stack before quoting, and we bring the inspection report back to you so you can see what we’re working from.
Most of Gravesend’s original chimneys were built for coal and then oil furnaces, and many were later connected to gas boilers without a liner ever being added for the new fuel. The result is condensate damage and failing mortar joints that a fresh cap alone won’t fix, and that a lot of generalist contractors miss when they climb up to slide a cap on. We bring that to you honestly, with photographs and a written estimate. We’re a dedicated chimney company, not a roofing or HVAC operation that adds chimney caps to a menu.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Gravesend
Cap and crown work is its own discipline. Multi-flue stacks and party-wall chimneys in Gravesend need sizing done on site, not from a stock chart. These are the cap and crown services we handle in Gravesend.
Cap Installation in Gravesend
A correctly sized cap keeps wind-driven rain and debris out of a flue while allowing exhaust to escape. On Gravesend’s dense semis, the port opening has to match the exact footprint of a multi-flue stack or a single tile, and the wrong size lets water in sideways during a nor’easter. We install caps from Olympia Chimney and Gelco, both of which hold up to coastal exposure.

Cap Replacement in Gravesend
Most Gravesend caps we replace are rusted through or have been bent out of shape by wind and debris off the low roofs. A cap that’s missing bands or has lost its screen is letting rain straight into the flue, and on an unlined coal-era brick flue that means trouble. We fit the replacement to the flue and the stack, not to whatever size is easiest to source.

Crown Repair in Gravesend
A chimney crown is the concrete or mortar cap at the top of the stack that sheds water away from the brick below. In Gravesend, crowns crack at the bond, pull away from the flue, or break down where the flashing meets a low-pitch rear extension roof that doesn’t drain well. Repairing the crown before it fails saves you a far more expensive rebuild. Crown repair in Gravesend typically runs $200 to $450 depending on size and access.

Crown Coating in Gravesend
When a crown is cracked but the structure is sound, a proper coating can extend its life another decade or more. We use crown coatings that flex with temperature changes rather than cracking with the first hard freeze. Coating is one of the ways we keep a Gravesend roof out of full rebuild territory.
Multi-Flue Caps and Custom Caps in Gravesend
Gravesend has a lot of multi-flue stacks and party-wall chimneys where a stock cap simply won’t fit. We measure on site and have a custom cap fabricated for the size and shape, with Famco and Copperfield supplying the standard components. Custom caps in Gravesend usually run $300 to $650 depending on the number of flues and the metal specified.
Trusted Brands We Work With in Gravesend
We work with the professional chimney supply brands most generalist contractors don’t stock or specify. That means Olympia Chimney for standard caps, Gelco for stainless and stainless-clad options, Famco for weather-tight components, and Copperfield for custom cap fabrication. We specify the right material for the job, and we’re authorized to work with all of them. Fast turnaround on replacement parts means a Gravesend cap job rarely sits waiting for a shipment.
Common Chimney Cap & Crown Problems We See in Gravesend Homes
- Missing or rusted cap on a coal-era flue now serving a gas boiler. When a cap rusts through or disappears, coastal rain and nor’easter wind drive straight into an unlined brick flue. The acidic condensate from a modern gas appliance then eats at mortar joints that have no liner to protect them.
- A shared party-wall chimney with a cracked crown on one side. In attached Gravesend semis, one chimney often serves two units. A cracked crown on the neighbor’s side lets moisture and creosote odor cross the party wall into your flue, and it’s only visible when both sides are inspected.
- Flat or low-pitch rear-extension roofs with poorly drained crowns and flashing. Many Gravesend homes have rear extensions where the crown sits next to flat roofing that lets water pool. Standing water breaks down the crown and pulls the flashing loose.
- Undersized caps on a multi-flue stack. A single-tile cap fitted to a multi-flue stack leaves the extra ports open. Wind-driven rain enters the flues the cap doesn’t cover, and the crown becomes the only line of defence.
Pricing for Chimney Cap & Crown in Gravesend, NY
We keep our estimates honest and specific, because a lot of Gravesend homeowners have been told by a generalist that they need thousands of dollars of work they can’t verify. These are typical ranges for Gravesend:
| Service | Typical estimated range |
|---|---|
| Single-flue cap installation | $185 – $320 |
| Multi-flue cap installation | $280 – $520 |
| Cap replacement (existing cap removed) | $220 – $450 |
| Crown repair | $200 – $450 |
| Crown coating | $180 – $380 |
| Custom-fabricated cap | $300 – $650 |
What pushes a Gravesend job toward the top of a range is access. A rear-extension roof, a shared party-wall stack that requires inspecting both sides, or a chimney that needs a ladder stand-off all add time. The written estimate is the final price, and the estimate is free. Call (855) 551-0049. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
See the difference
Before
After
Before
After
Before
AfterThe Party-Wall Chimney: Why Gravesend Cap Work Is a Two-Sided Job
Here’s the detail that shapes almost every cap and crown call we get in Gravesend. Because the brick semis and rowhouses along Avenue U, McDonald Avenue, and the tightly packed side streets were built attached, one chimney stack frequently serves two neighboring homes. That means a failed cap or a cracked crown on your side of the party wall doesn’t just affect you. Wind-driven rain and creosote odor can cross through the party-wall chimney into the adjacent unit, and the homeowner often has no idea that’s where the smell or damp is coming from.
The fix isn’t obvious from one roof. A qualified local pro runs a Level 2 inspection on both sides of a shared party-wall stack, documents the crown for cracking, checks for breakdown at the flashing, and then sizes a correctly fitted multi-flue or custom cap and rebuilds or coats the crown so the flue is protected from rain and the neighboring unit stays isolated. That two-sided inspection and documentation is what we do as standard on Gravesend cap and crown calls, because a one-sided job leaves half the risk in place.
The failure modes are consistent: a rusted-through cap on an unlined coal-era flue now serving a gas boiler, with spalling mortar joints from years of acidic condensate; a shared crown cracked on one side letting moisture migrate; low-pitch roofs where standing water breaks down the crown and pulls flashing loose. We can’t fix any of it honestly without seeing the whole stack. And we say so when a repair can wait. Call (855) 551-0049 for a free estimate.
We Also Serve Cities Near Gravesend
Our work regularly takes us into the neighborhoods bordering Gravesend and the surrounding southern Brooklyn area, including Bensonhurst, Coney Island, Midwood, and Dyker Heights. If you’re in one of these areas and want a cap or crown looked at, the approach is the same: inspect the whole stack, document what we find, quote it honestly.
Serving Gravesend, NY – Our Local Coverage Area
We serve Gravesend and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Gravesend
A typical single-flue cap installation in Gravesend runs $185 to $320, and a multi-flue cap runs $280 to $520. Custom caps for unusual stacks usually run $300 to $650. The written estimate sets the final price. Call (855) 551-0049 for an exact quote – estimates are free.
The right size leaves every flue port covered without letting water in around the edges. You can’t judge it from the ground: a stock cap often looks like it fits but leaves one or two ports exposed on a multi-flue stack, and that’s the failure we see most on Gravesend’s shared and party-wall chimneys. Call us and the local pro will measure the stack on site.
Yes, we offer same-day service for cap and crown work in Gravesend when the schedule allows. A cap or crown replacement is usually a short visit. If you’re seeing water coming down the flue or you suspect the crown has failed, call (855) 551-0049. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
We cover Gravesend and the surrounding southern Brooklyn neighborhoods, including Bensonhurst, Coney Island, Midwood, and Dyker Heights. If you’re off Avenue U or McDonald Avenue or anywhere else in Gravesend, the local pro can reach you. Call (855) 551-0049 to confirm coverage and book a visit.
A shared party-wall stack needs a two-sided inspection before any cap or crown work is quoted. Because one chimney in Gravesend often serves two attached units, a one-sided repair leaves the other unit exposed and can let moisture and odor keep crossing the party wall. We document both sides first. Call (855) 551-0049 for a free estimate.
Contact Us for Chimney Cap & Crown in Gravesend
If your cap is missing or rusted, or your crown has cracked or pulled away from the flue, call (855) 551-0049 for a free estimate. We’re a chimney-only specialist, we work only on cap, crown, sweep, repair, and fireplace work, and we bring the inspection evidence with us so you know exactly what’s being quoted and why. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. You’ll find our team here in Gravesend and across southern Brooklyn, and our chimney cap & crown crew is ready to inspect and quote your job.
Written by the team at Chimney Sweep Bay Ridge.