Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Flatbush
Chimney repair in Flatbush usually means one thing: an old stack that was built for coal or wood and is now carrying a gas appliance, or nothing at all. The brick rowhouses off Church Ave and the pre-war apartment buildings along Flatbush Ave share a set of problems we see over and over, and most of them can be traced to original terra cotta flue tiles and mortar that has been through too many freeze-thaw cycles. We’re a chimney-only company, so the visit starts with a camera inspection and an honest report, not a sales pitch. Call (855) 551-0049 and we’ll book a sweep or an inspection at a time that works for your building.
Why Flatbush Homeowners Call Chimney Sweep Bay Ridge for Chimney Repair
Flatbush has a lot of chimney “experts” who show up after a leak and propose a rebuild before they’ve even looked up the flue. We work the other way around. The inspection comes first, the camera footage gets shown to you, and the written estimate sets the final price before anything gets touched. If the chimney can safely wait another season, we say so.
Because so much of our work in Flatbush involves shared party-wall stacks and multi-unit buildings, we’ve learned how to coordinate access with landlords, supers, and neighbors who all rely on the same chimney. We specify the material for the job rather than the material that’s closest to hand: HeatShield for cracked liner interiors that don’t need a full replacement, Gelco or Olympia Chimney components for flue and crown work, Famco caps where the original is missing. That matters more in Flatbush than in most places, because the originals are long gone and the replacements have to match a building that’s approaching a century old. Reach us at (855) 551-0049 to schedule.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Flatbush
The repair work that comes out of a Flatbush inspection usually lands in one of four categories: mortar, brick, water, or the metal and flashing that keep water out of the first three. Each of them is covered below.
Mortar Repointing in Flatbush
The mortar joints in an original 1920s or 1930s Flatbush chimney are often the first thing to go. Repointing means cutting out the failed mortar and packing new mortar into the joints, which restores the bond between bricks without replacing them. In Flatbush, we work carefully around the party-wall line so we don’t disturb the neighbor’s side of a shared stack.

Spalling Brick Repair in Flatbush
Spalling is brick that has absorbed water, frozen, and broken its face off. The humid summers and freeze-thaw winters here push it along, and a flat coastal-plain grade under the rowhouses doesn’t help drainage. We replace the damaged brick and address the source of the moisture so the new brick doesn’t start spalling in a couple of years.

Chimney Waterproofing in Flatbush
Waterproofing a Flatbush chimney means applying a breathable sealant to the masonry so rain stays out but moisture already inside can still escape. It’s the cheapest long-term protection you can put on an old brick stack. It also makes sense on the many Gas-converted rowhouses where the flue has gone dormant and nobody has been watching the masonry.

Flashing Repair in Flatbush
Flashing is the metal where the chimney meets the roof, and when it fails, water tracks down the chimney and shows up as a ceiling stain two floors below. On Flatbush’s pre-war rooflines the original flashing is often buried under layers of old repairs. We replace it with a proper step and counter-flashing detail rather than sealing over the problem.
Trusted Brands We Service in Flatbush
We work with professional chimney-industry brands that general contractors rarely stock or specify. DuraFlex flexible liners handle chimneys with offsets or bends that rigid liner installers turn away, which describes a lot of Flatbush interior chases. HeatShield restores a cracked liner surface without a full reline. We also work with Gelco and Olympia Chimney for crown and flue components, and Famco for caps. We don’t claim to stock inventory locally. We specify the right parts for your chimney and source them for the job, which keeps the timeline honest.
Common Chimney Repair Problems We See in Flatbush Homes
- Cracked and spalled terra cotta flue tiles. Decades of freeze-thaw cycles break down the original tiles, and once they crack, creosote can seep into the surrounding masonry where you can’t see it. That’s a hidden fire hazard, not a cosmetic issue.
- Uncapped dormant flues. When a rowhouse converts from wood to gas, the old flue stops getting attention and often loses its cap. Nor’easters then drive rain straight down the flue, and the mortar deteriorates from the inside out, behind plaster walls.
- Unlined or poorly lined shared party-wall stacks. In multi-family buildings one stack can serve several units. Draft problems and smoke odors get misdiagnosed as a cleaning issue when the real cause is a flue that was never lined for its current appliance.
- Failed crown and flashing at the roof line. The crown and the flashing are the two most common points of water intrusion, and both are easy to miss from the ground.
See the difference
Before
After
Before
After
Before
AfterThe Shared-Stack Reality of Flatbush Rowhouses
Flatbush chimneys are unusual in one way that changes how repairs get diagnosed. Many rowhouse chimneys sit on shared party-wall stacks, so a repair on your side frequently reveals that the neighbor’s flue is the actual source of the smoke smell or the water leak you called about in the first place. That condition is rare in detached-housing neighborhoods, and it’s the reason a Flatbush chimney visit can’t stop at your side of the wall. Before we finalize a repair plan, we check the neighboring flue for cross-contamination. If the problem is coming from next door, you need to know that before you spend money on your own stack.
The typical job tends to go like this. In a pre-war brick rowhouse or apartment building, a routine cleaning uncovers spalling brick or cracked mortar in the chimney crown, especially where original terra cotta flue tiles have deteriorated. A qualified local pro performs a Level 2 inspection with a camera to document the damage, then recommends targeted repointing or a new liner only when the footage shows the need. Because the stack is shared, the technician also checks the neighboring flue before finalizing the plan. Nothing gets recommended to a Flatbush homeowner without camera evidence they can see for themselves.
Pricing for Chimney Repair in Flatbush, NY
Chimney repair in Flatbush is priced per job by a written estimate, and the estimate is free. Typical ranges in this market:
| Repair | Typical Flatbush range |
|---|---|
| Mortar repointing (per chimney, partial) | $350 – $900 |
| Spalling brick replacement | $400 – $1,200 |
| Chimney waterproofing | $300 – $650 |
| Flashing repair or replacement | $300 – $750 |
| Crown repair | $350 – $850 |
| Full chimney rebuild | $3,500 – $9,000 |
What moves the price: how much of the stack is affected, whether it’s a shared party-wall stack that needs neighbor coordination, and whether access requires scaffolding or a roof-level setup. The written estimate sets the final number. Call (855) 551-0049 for a free estimate.
We Also Serve Cities Near Flatbush
We work throughout this part of Brooklyn, and our Flatbush coverage extends to the surrounding neighborhoods: Kensington, Midwood, Borough Park, and Sunset Park. If you’re in one of those and looking for chimney repair, we can book you on the same schedule. Call (855) 551-0049 for availability.
Serving Flatbush, NY – Our Local Coverage Area
We serve Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Flatbush
You can’t tell from smell alone, and that’s exactly why a shared stack needs a camera inspection that checks both flues. A Level 2 camera inspection shows which flue is drawing poorly or leaking, and cross-contamination between party-wall flues is common in Flatbush’s pre-war multi-family buildings. Call (855) 551-0049 to book an inspection.
In most Flatbush rowhouses, repointing is enough if the brick faces themselves are still intact and only the mortar joints have failed. A rebuild becomes necessary when the brick is spalling or the stack is leaning. We confirm which one you’re facing with a camera inspection and a close look at the masonry, and we show you what we found. Call (855) 551-0049 for an estimate.
Yes, an annual inspection still matters, though the visit is more about the liner and the flue’s condition than about creosote from wood. Gas appliances vent moisture and mildly acidic exhaust into the flue, and in an unlined or older clay-tile chimney that exhaust can degrade the masonry over time. Call (855) 551-0049 to book an inspection.
You can’t reliably tell from the firebox, because third-degree creosote is a hardened, glazed layer on the flue walls that you can only see with a camera. A sweeping and inspection with a camera gives you an honest answer. Call (855) 551-0049 for a sweep.
Most crown cracks get repaired by removing the failed section and rebuilding the crown’s sloped top, often alongside fresh flashing work where the chimney meets the roof. In Flatbush’s pre-war rooflines the flashing is frequently the other half of the leak. Call (855) 551-0049 and we’ll give you a free written estimate.
Whether you’re on a pre-war rowhouse off Church Ave or a multi-unit building near Flatbush Ave, Chimney Sweep Bay Ridge can inspect, sweep, and repair the same stack without handing you off to a different contractor. Our technicians have up to 11 years of experience, and we work with professional-grade materials that hold up to Brooklyn’s winters. Call (855) 551-0049 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bay Ridge.