Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Bensonhurst
If your cap is rusting through or your crown is shedding mortar, the fix is usually straightforward. A typical chimney cap and crown job in Bensonhurst runs $275 to $1,850 depending on what’s failing, and we’ll tell you plainly whether it needs attention now or can safely wait a season. We work the rowhouse blocks from 86th Street down to Bay Parkway, in Gravesend and Bath Beach and all through the two-family brick stock between them, so we know how these chimneys are built and what this weather does to them. Our technicians have up to 11 years of experience with shared flues, salt corrosion and coastal crowns. Call (855) 551-0049. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Bensonhurst Homeowners Call Chimney Sweep Bay Ridge for Chimney Cap & Crown
Chimney Sweep Bay Ridge is a chimney-only company, and that focus matters here. In Bensonhurst, a single chase often serves two flues for two separate boilers, so a cap job isn’t just “put a lid on top.” It’s reading what’s actually capped, what’s pulling air, and what’s been quietly abandoned since a boiler was replaced.
We go in with an inspection first, not a sales pitch. You see the photos from the chase top and the flue interior, and we put a flat price in writing before anyone books the sweep. If a crown can be coated rather than torn out and rebuilt, we say so. If a full reline isn’t warranted, we say that too, and we tell you when the work can safely wait until spring.
Our technicians have up to 11 years of experience with the specific corrosion pattern local rowhouse owners see: galvanised caps that give out at the screw lugs, crown edges that craze and chip, and chase-top flashing that opens at the mortar joint. We install with professional-grade components from brands like Olympia Chimney and Gelco, and we work with your insurer when a leak has done interior damage. Call (855) 551-0049 for a free estimate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Bensonhurst
Every job starts with an inspection of the chase top. On a two-family Bensonhurst rowhouse that means looking at every flue opening, not just the one you can see from the yard.
Cap Installation
A new cap keeps rain, birds and downdrafts out of the flue. On Bensonhurst’s brick rowhouses we usually set a stainless cap with a sealed base and proper spark screening, sized to the actual flue opening. We check the second boiler flue at the same time, because a shared chase often has one uncapped terminal that nobody’s noticed.

Cap Replacement
Galvanised caps and their screw lugs rust through within a few years of salt-air exposure in this part of Brooklyn. When the cap lifts in wind or drops onto the crown, it can crack the masonry on impact. We pull the old unit, inspect the crown underneath, and set a stainless replacement that won’t go the same way. This is one of the most common jobs we do in Bensonhurst.

Crown Repair
The crown is the mortar-washed top of the chimney itself, and on minimally updated pre-war homes in Bensonhurst it’s often the original. When the edge spalls from freeze-thaw cycles, water tracks down the flue beside the liner and can reach the boiler. We rebuild damaged crowns with the correct slope and overhang so water sheds away from the chase instead of into it.

Crown Coating
Not every crown needs to come off. When the damage is surface-level crazing rather than structural, a flexible crown coating seals the hairline cracks and restores the shed line. We coat with a professional-grade elastomeric compound, matched to what the masonry can hold. If the crown is too far gone for coating, we tell you before anyone starts. You can read more about how this fits with our chimney cap & crown work across the bay.
Trusted Brands We Service in Bensonhurst
Cap and crown work is only as good as the parts and sealants behind it. We specify products from brands built for the chimney trade: Olympia Chimney for stainless caps and multi-flue assemblies, Gelco for crown and flashing sealants that hold up through coastal winters, and Famco for flue components and cap hardware that meet code. These aren’t general hardware store pickups. We source professional-grade materials and schedule the job once the right components are on hand, so a Bensonhurst cap replacement happens once, done correctly, with parts matched to the flue size and the exposure your chase actually sees.
Common Chimney Cap & Crown Problems We See in Bensonhurst Homes
- Rusted cap tops and screw lugs. Salt air eats through galvanised hardware faster here than inland. A cap that’s loose in wind or sitting crooked on the crown is usually two rusted lugs away from falling.
- Spalled and crazed crown edges. Freeze-thaw winters along the two-family blocks open hairline cracks that a heavy downpour pumps straight down beside the liner. Water reaching a gas boiler flue is the failure that costs the most to fix later.
- Chase-top flashing opening at the mortar joint. On pre-war rowhouses that were minimally updated, the original flashing often separates where it meets the brick. That leak enters the shared flue system and shows up in two units at once.
- Split flues on one chase. A cap sized to the visible clay tile can leave the second boiler flue wide open to rain and downdraft. In a shared chase, that uncapped terminal is easy to miss and worth checking on every inspection.
See the difference
Before
After
Before
After
Before
AfterWhy Coastal Exposure Changes Cap and Crown Decisions Here
Bensonhurst sits close enough to the water that salt hangs in the air year-round, and it shows in what fails first. The corrosion usually starts where a galvanised cap’s screw lugs meet the masonry and where the crown’s mortar-washed edge faces the weather. The lug rusts, the crown chips and spalls, and the next heavy downpour wicks water down the flue beside the liner. A qualified technician typically lifts the old cap, taps the crown to hear whether the spalling is hollow or surface-level, re-sets or coats the crown, and sets a stainless multi-flue cap with sealed flashing so both boiler flues in the shared chase stay dry and drafting. The one thing we won’t rush is skipping a flue. In two-family Bensonhurst rowhouses, a cap that covers only the visible clay tile can leave a second boiler flue uncapped and drawing salt air and rain all year – a split-chase condition far less common where single-family detached homes dominate. When you call us, we inspect the whole chase top before quoting, so nothing gets capped twice and nothing gets left open.
Pricing for Chimney Cap & Crown in Bensonhurst, NY
Pricing here follows the materials, the flue count and how far the crown has gone. Stainless costs more up front than galvanised, but in salt air it outlasts a galvanised cap by years, which is why we recommend it on coastal blocks. Multi-flue caps cost more than single because of the assembly and the sealed flashing. Here’s what typical jobs run in Bensonhurst:
- Single-flue stainless cap installation: $275 to $550
- Multi-flue cap for a shared two-family chase: $450 to $850
- Crown repair and rebuild with correct slope and overhang: $650 to $1,450
- Flexible crown coating over a sound but crazed crown: $350 to $700
- Chase-top flashing re-set with new sealant and counter-flashing: $400 to $900
Those are estimated ranges. The written estimate sets the final price, and the sweep and inspection is a flat price you agree to before we book. Nothing gets added for ladder work or a second flue without your sign-off first. Call (855) 551-0049 for a free estimate.
We Also Serve Cities Near Bensonhurst
Cap, crown and inspection work doesn’t stop at the neighborhood line, and neither do we. We work all of Bensonhurst and the surrounding communities across southern Brooklyn: Gravesend, Dyker Heights, Midwood and Borough Park. The rowhouse stock and salt exposure are similar throughout, so the inspection and material advice carry over cleanly. Call (855) 551-0049 to book a sweep in any of them.
Serving Bensonhurst, NY – Our Local Coverage Area
We serve Bensonhurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Bensonhurst
Salt air is the difference. Bensonhurst’s coastal exposure attacks galvanised cap tops and their screw lugs year-round, while a Queens cap inland sees far less salt. Stainless replacements hold up dramatically longer in this air; we specify Olympia Chimney stainless caps on Bensonhurst chases for exactly that reason.
Only if it’s a multi-flue cap sized to both terminals. A cap covering just the visible clay tile leaves the second boiler flue open to rain and salt air, which is common in shared Bensonhurst chases. We inspect every flue opening on the chase top before quoting and set a multi-flue assembly that covers all of them with sealed flashing. Call (855) 551-0049 for a free estimate.
Once a year is the right interval for a crown exposed to salt and freeze-thaw cycles. Inspecting before the heating season catches crazing and slight spalling while a coating will still hold, instead of waiting for a rebuild. The local pro inspects with a camera and photos you can see for yourself, and tells you plainly when the crown can safely wait a season.
It’s most likely efflorescence, the mineral salt drawn out of masonry by water passing through it, not salt from the air. It points to water getting in somewhere near the crown or flashing. An inspection finds the source; sealing over it without finding the leak only hides it. Call (855) 551-0049 and we’ll trace it before recommending anything.
Yes, if the crown is crazed or slightly spalled but structurally sound, a flexible crown coating seals the hairline cracks and holds up well through coastal winters. If a technician taps the crown and hears a hollow sound, that’s spalling that’s gone too deep, and a rebuild is the honest call. We tell you which before anyone starts. Call (855) 551-0049 for a free estimate.
If your cap is loose or your crown is shedding, don’t wait for the next storm to find out what’s underneath. Call (855) 551-0049 for a free estimate. Our technicians have up to 11 years of experience, and the local pro arrives state-licensed and insured with a camera and photo report so you see exactly what the chase top shows. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A flat price in writing, agreed before we book, and straight answers on what can wait.
Written by the team at Chimney Sweep Bay Ridge.