Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Midwood
If the cap on your flue is rusted through or the crown above your brick stack is cracking, you’re in the right place. We’re a chimney-only specialist serving Midwood, and we handle caps and crowns from the first camera inspection to the finished mortar on top of the stack. That matters more here than in most parts of Brooklyn, because much of the chimney work across Midwood is driven by gas boilers and water heaters vented into old clay-tile flues, not by fireplaces. We know the attached brick rowhouse blocks, the tight side yards, and the access quirks that come with them. Call (855) 551-0049 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Why Midwood Homeowners Call Chimney Sweep Bay Ridge for Chimney Cap & Crown
Midwood’s chimney work looks different from what people picture. Block after block of attached and semi-detached brick rowhouses, many built between the 1920s and the 1950s, still carry their original masonry stacks and clay-tile liners. Those flues were sized for coal and oil equipment. Today most of them vent a gas boiler or a gas-fired water heater, and some of them don’t vent anything at all. Your cap and crown sit at the top of that stack.
That’s where we focus. A rusted or missing cap over a gas-appliance flue is usually a draft and exhaust problem before it ever becomes a soot problem, and a cracked crown often lets water into the wall cavity of the attached house next door before you notice a stain in your own ceiling. We work on the whole chimney system, so the same crew that inspects your flue can repair the crown, reseal the flashing, and fit the right cap. No handoff gaps.
We also carry the material brands this kind of repair calls for. HeatShield ceramic resurfacing restores a cracked liner without a full relining, and Gelco and Olympia Chimney components let us match caps and crowns to the actual stack instead of forcing a universal fit. Our technicians have up to 11 years of experience. When we recommend work, it comes with camera footage you can look at yourself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Midwood
Every job starts with a look down the flue. A qualified technician runs a camera, shows you what’s there on-screen, and then talks through the options. Here’s what that work usually involves on a Midwood chimney.
Cap Installation in Midwood
A properly sized cap keeps rain, birds, and nest material out of the flue while letting exhaust escape. On Midwood’s older brick stacks, that often means a custom fit rather than a stock part, because the flue tiles don’t run in standard sizes. We install caps built for the actual opening and the appliance venting into it, so a gas boiler flue drafts the way it should.

Cap Replacement in Midwood
Midwood’s coastal-humid climate is hard on caps. Humid summers and winters that cycle above and below freezing rust out a thin steel cap in a few seasons. When we replace one, we check the flue below it at the same time, since a missing or failed cap usually means debris has already found its way into the stack. A rusted cap over a boiler flue is a draft problem worth fixing before heating season.

Crown Repair in Midwood
The crown is the sloped mortar cap at the very top of the stack that sheds water away from the brick and liner. The original brick crowns common on Midwood’s 1920s-1950s rowhouses crack along their joints from years of rain and freeze-thaw. When water gets in, it runs down against the clay-tile liner and flashing, spalls the brick, and can find its way into a shared wall. We rebuild or recoat crowns using Gelco materials matched to the job.

Crown Coating in Midwood
Not every cracked crown needs rebuilding. When the mortar is sound underneath and the damage is surface-level, a proper crown coating can seal the joints and buy the stack years before a full rebuild. We only recommend coating when the crown can actually carry it, and we show you why on camera. A coating over a failing crown just hides the problem until the next thaw.
Trusted Brands We Service in Midwood
We install and repair with materials from a professional roster: HeatShield, Gelco, Olympia Chimney, and Famco, along with DuraFlex and Copperfield. These are trade-grade brands generalist contractors rarely spec, and they matter on a Midwood chimney because old stacks don’t fit universal parts. HeatShield handles liner restoration on a cracked flue. Olympia Chimney and Famco supply caps that match the flue opening, and Gelco covers the crown and masonry side. We don’t claim to stock parts for every job, but we source the right component for the stack in front of us and turn the work around without cutting corners on materials.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Midwood Homes
- A rusted or missing cap over a gas-appliance flue. Birds and nest material drop into an oversized flue venting a boiler or water heater, cutting draft and backing exhaust into the home. This is the single most common cap call we get in Midwood.
- Original brick crowns cracking along their mortar joints. Under freeze-thaw cycling, water works into the joints, spalls the brick, and runs down against the clay-tile liner and flashing. On attached rowhouses, that leak often shows up in a neighbor’s wall before your own.
- Single-flue caps fitted over a multi-flue stack. A crown repair without a proper multi-flue cap leaves adjacent openings uncovered, so the same failure returns within a few winters. The cap has to cover the whole top of the stack.
- Oversized clay-tile flues venting modern gas equipment. The liner is bigger than the appliance needs, so the flue runs cold and drafts poorly. A camera inspection shows whether the fix is a correctly sized cap, a liner change, or something simpler.
Pricing for Chimney Cap & Crown in Midwood, NY
Here’s what cap and crown work typically runs in Midwood’s market. A standard single-flue cap installation runs about $250 to $450, and a custom or multi-flue cap runs $400 to $850 depending on the number of openings and the stack shape. Crown coating is typically $350 to $650. A full crown rebuild runs $700 to $1,500, because access on these block-lot properties often means working from a narrow side yard or over a neighboring roof. Liner restoration is quoted separately based on what the camera shows.
Those are estimates, not fixed prices. The written estimate sets the final number, and the estimate itself is free. Nothing gets recommended unless the camera shows a problem you can watch on-screen, and if the work can safely wait, we’ll tell you so. Call (855) 551-0049 for an exact quote on your Midwood chimney.
We Also Serve Cities Near Midwood
We cover the neighborhoods around this part of Brooklyn as well, including Kensington, Bensonhurst, Flatbush, and Gravesend. The housing stock across these areas overlaps with Midwood, so the same chimney problems show up block to block. If your stack is nearby, the Chimney Cap & Crown work we do here applies to your flue too. Call and we’ll confirm coverage and get an estimate scheduled.
Serving Midwood, NY – Our Local Coverage Area
We serve Midwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Midwood
Yes. The flue venting your gas boiler or water heater needs a cap just as much as a fireplace flue does, and in Midwood it matters more. A missing or rusted cap lets birds and debris drop into the stack, which cuts draft and can back combustion exhaust into the home. A correctly sized cap keeps the flue clear and lets exhaust escape. Call (855) 551-0049 for an exact quote on your flue. Estimates are free.
It depends on how deep the damage goes, and a camera or an on-roof look is the only honest way to know. If the mortar underneath is sound and the cracks are surface-level, a crown coating can seal it and add years. If the joints have opened deep or the brick is spalling, a rebuild is the right call, and coating it would just delay the problem. We show you which one you’re looking at before anything gets priced. Call (855) 551-0049 for a free estimate.
The crown is the sloped mortar top of the brick stack that sheds water away from the chimney; the cap is the metal or mesh cover that sits over the flue openings. The crown protects the masonry. The cap keeps rain, birds, and debris out of the flue and lets exhaust through. On Midwood’s older stacks, both usually need attention at the same time, which is why we assess them together. Call (855) 551-0049 to book an assessment.
Ask to see the camera footage. Any crown or liner recommendation on your Midwood chimney should come with what a technician saw down the flue, shown to you on-screen, before you agree to anything. Look for cracked mortar joints, spalled brick, or a rusted-out cap you can see for yourself. If a recommendation comes with no evidence, ask why. We won’t recommend work we can’t show you. Call (855) 551-0049 for a free estimate.
On Midwood’s gas-vented flues, a blocked flue is most often a bird’s nest or fallen liner debris lodged in an oversized clay-tile stack. The boiler or water heater then can’t draft properly and shuts down to protect itself. The fix starts with an inspection to clear the blockage and find where it came from, then a correctly sized cap to keep it from happening again. Don’t run the appliance until it’s checked. Call (855) 551-0049 for a free estimate.
If your Midwood chimney needs a cap, a crown repair, or just an honest look down the flue, call Chimney Sweep Bay Ridge at (855) 551-0049. The estimate is free, and the camera footage is yours to see before any work is recommended. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bay Ridge.