Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across St. George
If water is getting into your chimney, the cap and crown are the first places we look. A chimney cap and crown in St. George usually runs $425-$1,900 depending on how many flue openings the stack has and whether the crown can be coated or has to be rebuilt. We’re a chimney-only company, and we know how St. George’s dense rowhouse blocks are put together: shared stacks, offset flues, tight roof access. Our technicians have up to 11 years of experience. Call (855) 551-0049 for a free estimate.
Why St. George Homeowners Call Chimney Sweep Bay Ridge for Chimney Cap & Crown
St. George is a neighborhood of pre-1950 detached houses and low-rise apartment buildings on dense blocks, and that shapes the work. Many of the chimneys here still have their original clay-tiled flues and flat mortar crowns. A flat mortar crown on a pre-1950 St. George brick stack cracks at the flue joint, and coastal humidity plus freeze-thaw winters let water run behind the brick and spall the stack face. We treat crown repair and multi-flue capping as the two most common points of water intrusion, so we go after them directly rather than treating a sweep as the whole job.
What you get from us is a written estimate you approve before we book, an inspection starting point that isn’t a sales funnel, and the same company handling the sweep, the inspection and the repair. If the crown just needs a coating, we’ll tell you that instead of quoting a rebuild. That straight answer is what keeps homeowners on our list when a cap rusts through or a crown goes soft.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in St. George
This is the full scope of cap and crown work we handle. Every job starts with the inspection, and nothing gets recommended that the camera doesn’t show you.
Cap Installation in St. George
A correctly sized cap is the single cheapest way to keep rain, birds and debris out of an open flue mouth. On St. George’s older rowhouse blocks the brick stack rising from a shared party-wall chase is frequently split into offset flues serving two addresses, so a cap measured on one side of the roofline often has to be sized and seated to protect a neighbor’s flue mouth as well as the owner’s. We measure every opening and set the cap to cover all of them.

Cap Replacement in St. George
Most caps fail from rust at the seams and mesh, not from storm damage. When a single-flue cap has been sitting on a multi-flue stack, the exposed mouths on the rest of the stack have been taking rain and neighbor exhaust for years. We pull the old cap, inspect the mouths it was supposed to protect, and set a proper replacement sized to the whole stack, not just the one opening.

Crown Repair in St. George
A cracked crown at the flue joint is the most common entry point for water in St. George brickwork. We rebuild failed crowns so they shed water away from the flue instead of into it, and we cut a fresh seal where the crown meets the stack. Left alone, a cracked crown lets freeze-thaw meltwater soak the brick, and the first sign is often a spalled face or a rust streak down the firebox wall rather than any smoke problem.

Crown Coating in St. George
When the mortar is sound and only the surface is breaking down, a crown coating extends the life of the crown without a full rebuild. It’s a smaller job with a smaller price, and we’ll tell you plainly when a coating will hold and when it won’t.
Multi-Flue Cap & Custom Cap in St. George
Multi-flue caps cover every opening on a single stack under one lid, which is what most St. George rowhouse stacks actually need. When a stack has odd dimensions, offset flues or a party-wall split, we spec a custom cap sized and seated to the real footprint. A cap seated with a slight gap or the wrong overhang leaks into the adjacent unit rather than the owner’s, and that defect usually stays hidden until staining shows up next door.
Trusted Brands We Work With in St. George
We specify the right material for the job, and we work with professional chimney-industry brands including Olympia Chimney, Gelco, Famco and HeatShield. Olympia Chimney and Gelco cover caps and crown materials; Famco is part of the kit we draw on for restoration work; HeatShield is the ceramic resurfacing system we use when a flue liner needs restoring rather than replacing. We don’t claim to stock parts locally, and we don’t need to: we order what the job calls for and set a realistic date. If a job needs a custom cap, the measurement and spec happen first so the piece arrives right the first time.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in St. George Homes
- Cracked mortar crowns on pre-1950 brick. Original flat crowns crack at the flue joint, and coastal humidity plus freeze-thaw winters let water run behind the brick and spall the stack face.
- Single-flue caps on shared stacks. A cap sized for one chimney mouth leaves the neighboring flue in a shared St. George rowhouse stack exposed, so a neighbor’s appliance exhaust and rain both vent into an unprotected opening.
- Offset flues in the party-wall chase. When flues are split between addresses, a cap or crown seated with the wrong overhang leaks into the adjacent unit rather than the owner’s, hiding the defect until staining shows up next door.
- Dormant flues behind the wrong cap. Many chimneys in St. George have sat unused for decades and hide broken flue tiles, soot-fall and even raccoon nests that only a camera inspection reveals.
Pricing for Chimney Cap & Crown in St. George, NY
These are typical estimated ranges for St. George. The written estimate sets the final price, and the estimate itself is free.
| Work | Typical range in St. George |
|---|---|
| Standard single-flue cap, installed | $185-$400 |
| Multi-flue cap, installed | $425-$850 |
| Custom cap for offset or shared stacks | $650-$1,400 |
| Crown coating | $300-$600 |
| Crown repair or rebuild | $500-$1,900 |
The number of flue openings drives most of the price. Roof access on a tight St. George street and a stack shared with a neighbor can add scope, because the cap has to be measured and seated to cover both openings. If the crown turns out to be sound, you’ll hear that too.
We Also Serve Cities Near St. George
We work across the north shore and the surrounding neighborhoods, and the same shared-stack logic applies block to block. If you’re just outside St. George, we cover Stapleton, Rosebank, South Beach and Bay Ridge. You can read more about our St. George coverage, or look at our full chimney cap & crown service.
Serving St. George, NY – Our Local Coverage Area
We serve St. George and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in St. George
Because on many St. George rowhouse blocks the flues share one party-wall chase. A cap sized only for your mouth leaves the neighbor’s opening exposed, and an exhaust or rain leak on their side can back into your unit. We measure the whole stack, not one opening. Call (855) 551-0049 for a free estimate.
It comes down to whether the mortar is sound. A crown with a surface breakdown but solid mortar can take a coating; one cracked at the flue joint or spongy underfoot needs a rebuild. We inspect and photograph it so you can see the difference. Call (855) 551-0049 for a free estimate.
Yes. A dormant flue often hides broken tiles, soot-fall or an animal nest, and capping over a problem traps it. We run a camera inspection first and show you what’s there. Call (855) 551-0049 for a free estimate.
Stainless steel with a properly seated lid lasts longest here; galvanized caps rust at the seams fast in coastal humidity. We spec Olympia Chimney and Gelco components for durability. Call (855) 551-0049 for a free estimate.
Only if the cap covers the flue that’s causing it. In a shared St. George stack, the fix is a multi-flue or custom cap seated over every opening, plus a check for offset flues and downdraft. We verify the cause before quoting. Call (855) 551-0049 for a free estimate.
Ready to protect your chimney from St. George’s coastal weather? Call (855) 551-0049 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bay Ridge.