Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Dyker Heights
If your chimney crown is crumbling, your brickwork is flaking, or you’ve been told you need a full reline, we’re the chimney-only specialist to call in Dyker Heights. We work on chimney and fireplace systems exclusively, from inspection through repair, and we connect you with local professionals who’ve spent years on the kind of older masonry stacks that fill this neighborhood. On a detached house off 13th Avenue or near the Dyker Beach Park side of the neighborhood, the repair usually isn’t cosmetic. It’s structural, and it usually started with water. Call (855) 551-0049 to book an inspection. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Dyker Heights Homeowners Call Chimney Sweep Bay Ridge for Chimney Repair
Chimney repair gets sold badly around here. A homeowner hears “your flue is shot, you need a full reline” from a general contractor who never put a camera inside the stack, and the number lands north of a few thousand dollars. We take the opposite path. We inspect first, show you the footage, and explain what we see before anyone quotes a repair. The local pro who does the work is state-licensed and insured as their state requires, and our technicians have up to 11 years of experience with masonry chimneys.
That inspection-to-repair approach matters more in Dyker Heights than in most of Brooklyn. This is a landmark-detached-house neighborhood, and almost every chimney we look at belongs to a freestanding one-to-three story single-family home built somewhere between the 1900s and the 1970s. Plenty of those houses still run oil-fired boilers long after the rest of the borough converted to gas. So we’re not diagnosing apartment-building flues. We’re diagnosing century-old masonry stacks that were sized for an appliance nobody’s installed in decades.
We also know how to work around this neighborhood’s calendar. Once December arrives and the holiday-light displays go up on rooftops and scaffolding fills the curbs, getting a ladder to a chimney or a truck anywhere near the property becomes nearly impossible until January. We schedule accordingly, and we’d rather tell you a job can wait until the displays come down than fight our way in.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Dyker Heights
Three repairs do the heavy lifting in Dyker Heights: repointing, spalling brick repair, and waterproofing. Flashing repair runs a close fourth. Here’s what each one actually involves on these houses.
Mortar Repointing
Repointing means grinding out failed mortar joints and packing them with fresh mortar matched to the original. On the brick-and-stucco facades common here, the joints between courses take decades of freeze-thaw cycling before they crumble, and once they go, water rides straight into the wall. A typical repointing job in Dyker Heights runs $900-$2,800 depending on how much of the stack needs work. We match mortar composition to the brick so the repair doesn’t damage softer older masonry.

Spalling Brick Repair
Spalling is the flaking and popping of the brick face itself, usually after years of moisture getting in and freezing. You’ll see it along the crown and on the upper courses. Replacing spalled brick on a Dyker Heights chimney typically costs $600-$2,200 for a partial repair, with full top-to-bottom rebuilds running considerably higher. Worn brick gets swapped for matching units, not patched with mortar that will fail again in a season or two.

Chimney Waterproofing
Once the masonry is sound, we seal it. Waterproofing on a Dyker Heights chimney generally runs $350-$850 and is the single cheapest step that prevents the next round of spalling. A breathable masonry sealer lets vapor escape while blocking liquid water. Doing this before the winter soak saves real money down the line.

Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s the most common entry point for water on these steep peaked roofs. Failed flashing shows up as ceiling stains far from the chimney, which is why it gets misdiagnosed so often. Repair runs $400-$1,200. Correct flashing work is fiddly, and getting the step and counter-flashing right is worth doing properly the first time.
Trusted Brands We Service in Dyker Heights
When a repair calls for specialist materials, we specify from a curated roster: HeatShield, Gelco, Olympia Chimney, Famco. That matters on a Dyker Heights job because the older stacks here often need restoration-grade products rather than what a general contractor keeps around. HeatShield ceramic resurfacing can restore a damaged clay-tile flue without a full liner swap, and Gelco crown materials hold up better against the nor’easter rain that pummels these rooftops. We don’t stock parts, but we specify the correct material for the job and coordinate turnaround with the supplier. You’ll get the right product, not a compromise.
Common Chimney Repair Problems We See in Dyker Heights Homes
The failures here follow a pattern. These four come up again and again on the detached houses between 11th and 13th Avenue and along the ridge toward Bay Ridge.
- Unlined or undersized clay-tile flues. Many of these chimneys were built with clay tiles that were never sized for the boiler venting into them. Draft and condensation problems get blamed on the boiler when the real issue is the stack.
- Water through a cracked crown. The crown is the concrete cap on top, and its job is to shed water away from the masonry. When it cracks, rain and snowmelt soak in and start the spalling cycle.
- Rusted dampers misread as a sweep problem. A damper that no longer seals lets in moisture and stops the fireplace working properly. Homeowners often book a sweep when the fix is a damper and flashing repair.
- Sold relines with no evidence. We hear it constantly: a full reline quoted on a verbal description, no camera footage, no proof the tiles are cracked. That’s what this page exists to stop.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Dyker Heights, NY
Here’s what repair work typically runs in this market. These are estimates, not quotes. The written estimate is the final word, and it’s always free to get one.
| Repair | Typical Estimate |
|---|---|
| Mortar repointing | $900-$2,800 |
| Spalling brick repair (partial) | $600-$2,200 |
| Chimney waterproofing | $350-$850 |
| Flashing repair | $400-$1,200 |
| Level 2 camera inspection | $250-$500 |
What drives the spread: how much masonry needs replacing, whether working from a ladder is enough or staging is needed, and whether the crown can be repaired or has to be recast. A full chimney rebuild pushes well past these ranges, but it should only come up when the camera footage and the inspection report justify it. That’s the whole point of our approach. You see the evidence before you see the quote.
We Also Serve Cities Near Dyker Heights
We work chimney repair across Dyker Heights and the surrounding neighborhoods. If you’re in Bay Ridge, Bensonhurst, Borough Park, or Sunset Park, the building stock is similar and the repair approach is the same. Our chimney repair team runs inspections across all of them.
Serving Dyker Heights, NY – Our Local Coverage Area
We serve Dyker Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Dyker Heights
Yes, and it’s the most common thing we get asked here. Many of these houses still run oil-fired boilers, and those boilers vent into clay-tile flues that were often never sized or lined correctly for the appliance. When that happens, the flue drafts poorly and condensation eats the masonry from the inside, and the problem gets blamed on the boiler. The right repair starts with a camera inspection to see whether the flue was ever correct for the boiler in the first place. Call (855) 551-0049 to get an inspection booked. Estimates are free.
You need a reline when the clay tiles are genuinely cracked or the flue was never sized for the appliance venting into it; repointing is for failed mortar in the masonry surrounding the flue. Those are different problems with very different price tags, which is exactly why we don’t quote a reline without camera footage you can watch yourself. If the tiles are sound and the issue is mortar or water intrusion, repointing and waterproofing will fix it. Get the inspection first. Call (855) 551-0049 for a free estimate.
Absolutely, and we prefer it. Once the elaborate rooftop displays and scaffolding go up for December, exterior access and curb parking effectively disappear until January, so we schedule repair work before the displays go up or after they come down. If you’re planning a spring repair, booking in the fall is smart. Call (855) 551-0049 and we’ll find a window that works.
Water, almost always. Nor’easter rain and snowmelt work their way through a cracked crown or failed flashing, soak into the brick, and freeze, which pops the brick face off. A rusted damper comes from the same moisture getting into the flue. The fix is to stop the water first with crown and flashing repair, then chase the damage with repointing and waterproofing. Call (855) 551-0049 for an inspection and a free estimate.
Yes, because the damage we find in Dyker Heights is usually caused by water and time, not by burning. Long humid off-seasons between heating months cause the real deterioration in unlined flues, and a chimney you didn’t use all year has still been rained on and frozen through. An inspection after even one quiet year catches small issues before they get expensive. Call (855) 551-0049 to book one. We answer 24/7.
Talk to a Chimney Specialist in Dyker Heights
If you’ve been told you need thousands of dollars of chimney work and you can’t verify why, we’ll show you. Every inspection includes camera footage and photos you keep, nothing gets recommended without the evidence in plain sight, and we’ll tell you honestly when a repair can safely wait. Chimney Sweep Bay Ridge handles chimney and fireplace systems exclusively, and our technicians have up to 11 years of experience. Call (855) 551-0049 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bay Ridge.