Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in St. George?
Chimney cleaning in St. George typically costs $185 to $320, and most standard sweeps land near the middle of that range. A straightforward cleaning of a single flue on a wood-burning fireplace is the low end; a system with heavy creosote buildup, a gas appliance, or a flue that needs a camera look runs higher. We give written estimates before any work starts, so the number you hear on the phone is the number you see on the page.
Chimney Sweep Bay Ridge handles chimney and fireplace systems and nothing else. That focus matters when the price is on the table, because a dedicated chimney company can tell you what your system actually needs instead of padding a quote with work it doesn’t. Call (855) 551-0049 for a free estimate. We answer 24/7.
Key Takeaways
- Typical chimney cleaning in St. George runs $185 to $320 for a standard sweep.
- A Level 2 inspection with video scanning adds $75 to $200 depending on access and flue count.
- Heavy third-degree creosote or a blocked flue pushes a cleaning into the $350 to $550 range.
- Estimates are free, and the written estimate sets the final price.
- Cleaning and inspection come first; repairs are quoted separately only if the inspection finds a real problem.
Chimney Cleaning Cost Breakdown (2026)
St. George pricing breaks down by the task, not by a flat “chimney visit” number. Below are the typical ranges we see in this market for each piece of the work. Every figure is an estimate; the written quote you receive is what governs.
| Service | Typical St. George Range | What It Covers |
|---|---|---|
| Standard chimney sweep (one flue) | $185 – $320 | Brushing and vacuuming the flue, firebox, smoke chamber, and damper area |
| Sweep with heavy creosote removal | $350 – $550 | Stubborn glazed creosote that resists standard brushing |
| Gas fireplace flue cleaning | $150 – $260 | Lighter deposit removal typical of gas appliances |
| Level 1 inspection | $75 – $150 | Visual check of accessible portions of the system |
| Level 2 inspection with video scan | $150 – $350 | Camera inspection of the full flue, including offsets and concealed sections |
| Chimney cap installation | $225 – $575 | Single-flue or multi-flue cap, including fitting and seal |
| Crown repair | $350 – $900 | Cracked or failing crown, including the seal that keeps water out |
| Flue liner restoration (HeatShield) | Quoted per job | Ceramic resurfacing of a cracked or pitted flue |
| Full flue relining (DuraFlex) | Quoted per job | Flexible liner for offsets, bends, or a failed existing liner |
Two things move the number more than anything else: how much creosote has built up and whether the flue is straight. A straight, accessible flue on a wood-burning insert is a fast job. A flue with an offset, a smoke chamber that hasn’t been touched in years, or a rooftop that needs a ladder setup on uneven footing takes longer, and that time shows up on the estimate. St. George homes range from older rowhouses with internal chimneys to detached houses with exterior stacks, and exterior stacks tend to collect more moisture-related debris, which can mean more cleaning time and a closer look at the crown.
We work with professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That matters when a cleaning turns up a problem, because the same team that swept the flue can spec the right part rather than handing you off to another contractor.
What Affects Chimney Cleaning Pricing in St. George
Six factors drive the price in this market. Most of them are visible before we start, which is why we can usually give a firm estimate over the phone and confirm it on site.
- Creosote buildup. Light, sooty deposits brush out quickly. Glazed, tar-like creosote is a different job and takes more time and care, which raises the price. Fireplace habits and the wood you burn are the biggest drivers here.
- Flue shape and access. A straight flue is straightforward. A flue with bends or offsets needs flexible tooling, and DuraFlex liner capability exists precisely because those chimneys are common and rigid-only installers turn them away.
- Number of flues. A single-flue chimney is a single-flue price. A multi-flue stack with a shared crown costs more to clean and inspect because each flue is its own job.
- Wood versus gas. Gas appliances leave lighter deposits and typically clean for less. Wood-burning fireplaces produce more creosote and usually land in the standard sweep range or above.
- Inspection level needed. A routine cleaning pairs with a Level 1 visual check. If you’ve had a chimney fire, a liner change, or a property sale, a Level 2 video inspection is the right call and adds to the total.
- What the cleaning reveals. Most sweep visits find nothing serious. When they do, a cracked crown or a pitted flue gets quoted separately, and you decide whether to move forward.
St. George winters are cold enough that fireplaces get real use, and a chimney that sees steady burning through the season builds creosote faster than one used a few times a year. That’s a local reason to keep the cleaning on a regular rhythm rather than waiting for a problem to announce itself.
How to Save on Chimney Cleaning
The cheapest chimney cleaning is the one that doesn’t turn into a repair because the crown was left cracked for two seasons. A few practical habits keep the cost in the standard range.
- Burn seasoned wood. Dry wood produces less creosote, and less creosote means a faster, cheaper sweep.
- Don’t skip the cap. A missing or damaged cap lets water, debris, and animals into the flue. Chimney cap and crown work are the two most common points of water intrusion, and addressing them early is far less expensive than repairing the damage water causes.
- Book the cleaning before the burning season. Scheduling ahead means the sweep is a planned standard job, not a scramble when the first cold snap hits.
- Ask for the inspection to be part of the visit. Pairing a Level 1 visual check with the sweep costs less than booking them separately, and it catches small issues while they’re still small.
- Get the free estimate in writing. Call (855) 551-0049 and we’ll quote the job before anyone touches the chimney. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
For homeowners who want the full picture of what a dedicated chimney company handles, from the first sweep through structural repair, the chimney sweep service page lays out the five core categories we work in. And if you’re weighing a repair against a replacement, our guide to chimney repair in St. George explains where the line falls and why HeatShield ceramic resurfacing is often the smarter option for a flue with cracks but sound structure.
Is It Cheaper to Repair or Replace a Chimney Liner?
Repair is usually cheaper than replacement when the flue structure is sound and the damage is surface-level. HeatShield ceramic resurfacing restores a cracked or pitted flue at a fraction of the cost of a full reline, and it extends the life of a liner that still has good bones. Full relining with a DuraFlex flexible system makes sense when the existing liner has failed outright or the flue has offsets that need a new flexible liner to bridge. Which path is right depends on what the video inspection shows, and we won’t recommend the bigger job if the smaller one solves the problem.
Can You Clean My Chimney and Inspect It in One Visit?
Yes. Cleaning and a Level 1 visual inspection happen in a single visit, and that’s the most economical way to handle routine maintenance. You pay for one trip and get both the sweep and the honest assessment of what the flue looks like. If the inspection turns up something that warrants a closer look, a Level 2 video scan is scheduled as a follow-up and quoted separately. Working with a company that does inspection, sweep, caps and crowns, chimney repair, and fireplace repair under one roof means no handoff gaps between whoever finds the problem and whoever fixes it. Our technicians have up to 11 years of experience reading what a flue tells them.
FAQs – Chimney Cleaning Cost
How much does a chimney sweep cost in St. George?
A standard sweep in St. George runs $185 to $320 for a single flue. Heavy creosote or a multi-flue stack pushes that higher, and gas flues often come in a bit lower. Call (855) 551-0049 for a free estimate that fits your actual system.
Do I need a Level 2 inspection, and what does it add to the bill?
A Level 2 video inspection adds roughly $150 to $350 on top of a cleaning and is worth it after a chimney fire, a liner change, or a property sale. A routine Level 1 visual check usually adds $75 to $150. Call (855) 551-0049 and we’ll tell you which level your situation calls for.
How often should I have my chimney cleaned in St. George?
Most wood-burning fireplaces need a cleaning once a year with regular use; gas appliances often stretch to a check every year or two. If you burn steadily through the cold months, annual cleaning is the safer rhythm. Call (855) 551-0049 to get on a schedule.
Will a chimney cleaning cost more if you find a problem?
The cleaning price doesn’t change because of what we find. Repair work is quoted separately, with typical cap and crown jobs in the $225 to $900 range depending on the scope. You approve the repair before we do it. Call (855) 551-0049 for a free estimate.
Can you clean my chimney the same day I call?
Same-day service is often possible when the schedule allows, and cleaning itself typically takes under two hours. Call (855) 551-0049. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and a call outside dispatch hours gets booked into the next opening.
Book a Free Chimney Cleaning Estimate in St. George
St. George homeowners deserve a straight number and a company that treats chimney work as a craft, not an add-on to a general contracting list. We inspect honestly, clean thoroughly, and repair only what the inspection shows needs it, using professional-grade components from the brands we work with. Whether your flue needs a routine sweep, a cap to keep water out, or a closer look at the crown, the starting point is a free estimate and an honest conversation. Call (855) 551-0049. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the St. George market as of 2026. Chimney Sweep Bay Ridge offers free estimates – call (855) 551-0049.
Written by the team at Chimney Sweep Bay Ridge.
Related Reading
- chimney inspection in St. George
- chimney cap installation
- chimney crown repair
- fireplace repair in St. George
- chimney liner replacement
- chimney cleaning in Brooklyn
- chimney cleaning in Staten Island
- chimney cleaning in Bay Ridge
- creosote removal guide
- chimney leak repair
- wood-burning fireplace maintenance
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Rosa Herrera"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Vikram Patel"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Jessica Wong