G

Gelco Chimney Cleaning in Flatbush, NY

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Gelco Chimney Cleaning in Flatbush, NY

We provide independent Gelco service across Flatbush, and the one thing that makes our Gelco work here different is the building stock: shared party-wall stacks on pre-war rowhouses mean a cap repair on one side of the wall is rarely a one-unit decision. We work on Gelco galvanized, stainless, custom and Draft King caps, and because we’re an independent chimney company, not a Gelco dealer or a factory-authorized shop, the advice you get is about your chimney, not a product line. Our technicians have up to 11 years of experience. Call (855) 551-0049. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Call (855) 551-0049

Why Flatbush Residents Choose Us for Gelco Service

Flatbush homeowners call us because we’ve seen Gelco caps fail the same way again and again on Brooklyn masonry, and we can tell you what’s happening from the roof without guessing. A galvanized Gelco cap that’s rusted at the leg welds after 10 to 15 years of humid summers and nor’easter rain behaves the same way whether it’s on a Church Ave rowhouse or a 3-6 story apartment building a few blocks off Flatbush Ave. That repetition is where real familiarity comes from: no factory training, no endorsement, just years of pulling the same components apart and putting them back right.

We’re a chimney-only specialist. Inspection, sweep, cap and crown, chimney repair and fireplace repair all sit under one roof, so the person who inspects your Gelco cap and the flue beneath it is accountable for the repair that follows. We get our parts from quality independent suppliers and match the material to the actual chimney: OEM-equivalent Gelco components when they’re available, and a fabricated stainless cap sized to the original footprint when a custom size no longer exists.

Scheduling in Flatbush takes a little coordination, mostly because we’re working with landlords, managing agents and tenants on the same stack. We keep it simple: tell us who needs to be there, and we’ll set a window that works for everyone in the building. The exact price is always put in writing before the job starts.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Common Gelco Chimney Cleaning Problems We Solve in Flatbush

Most of the Gelco calls we get in Flatbush aren’t really cap problems. They’re what a cap problem has already done to the flue underneath it, and finding that out is the first step.

  • Rust holes at the leg welds on galvanized Gelco caps. After 10 to 15 years of nor’easter-driven rain and humid summers, the welded legs give way before the rest of the cap does. Once water starts running down the inside, it lands on the flue tile and the crown and starts spalling both. Flatbush’s freeze-thaw winters make it worse each year.
  • Custom Gelco caps that no longer fit the flue they were cut for. Terra cotta flue tiles spall and the cap width shifts over decades. A gap that used to be snug becomes an opening for rain and birds, which is often how a homeowner discovers the cap was never the problem in the first place.
  • Cross-drafting on multi-flue caps over shared stacks. A Gelco multi-flue cap sitting across a party-wall stack in a Flatbush rowhouse can pull a draft the wrong way when one flue is dormant. Smoke smell in the next unit or in the unit below is a common result.
  • Stainless Gelco caps installed without proper flashing. On these flat coastal-plain roofs, a cap set with no leaded or flashed base develops a leak at the seam that stains the interior plaster in pre-war apartment buildings long before anyone looks up.
  • Interior chases and dormant gas flues with no coverage at all. A lot of Flatbush fireplaces have been converted from wood to gas, leaving a dead flue in a plastered chase that collects moisture, spalls the flue tile, and eventually reports as a liner problem instead of a cap problem.

Gelco Service in Flatbush: What Local Conditions Mean for Your Equipment

The buildings along the Church Ave corridor and up around Flatbush Ave set the rules for this work. Most of the rowhouses and 3-6 story brick apartment houses here went up in the 1920s and 30s, with original terra cotta flue tiles and chimney stacks that run on shared party walls. One stack, several flues, several units. So when a Gelco cap comes off a Flatbush rowhouse, we’re usually looking at more than one flue opening, and the new cap has to cover the shared stack without blocking a neighbor’s draft or altering how the other unit vents. That’s why we measure the whole stack before we order anything custom.

The interior chases behind plastered fireplaces hide more than most owners expect. A cleaning visit here routinely starts as a sweep and turns into repointing at the crown or a liner conversation, because decades of creosote from mixed-use heating built up in flues nobody had looked at since the fireplace went gas. Camera inspection catches that before any of it becomes a surprise.

Gelco Models & Products We Service in Flatbush

We service all the common kinds of Gelco caps you’ll find on Flatbush masonry: galvanized multi-flue caps, stainless steel single-flue caps, custom-fabricated caps cut for a specific flue footprint, and Draft King chimney caps. Each one fails differently, so we don’t apply a single fix. A galvanized multi-flue cap that’s rusted through at the welds usually gets replaced with a stainless multi-flue unit sized to the shared stack. A custom cap on spalled tile gets recut or replaced to fit the original opening. A structurally sound Draft King cap over a failing crown may only need crown work, which saves your existing unit.

We’re an independent shop. We’re not authorized, affiliated or factory-trained by Gelco, and we don’t claim to be. We’re just very familiar with their components and we choose parts that fit the chimney you actually have.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Gelco Service Pricing in Flatbush

Prices here are set per job by a written estimate, and the estimate is free. Nothing gets recommended without camera evidence you can see for yourself, and we’ll tell you plainly when a repair can safely wait until a better season.

  • Inspection and sweep: priced as its own line item, based on the number of flues on the stack and how accessible the interior chase is. Party-wall stacks in Flatbush multi-family buildings take more setup than a single-flue rowhouse.
  • Galvanized or stainless cap replacement: cost depends on whether the new cap covers one flue or several, and whether the footprint matches a standard size or has to be custom.
  • Custom-fabricated caps: higher, because the cap is cut to the existing flue opening after decades of tile spalling.
  • Crown repair: less than a full cap replacement, and usually the right call when the Gelco cap itself is still sound but the mortar bed under it isn’t.

Call (855) 551-0049 for an exact quote. Estimates are free, and the written estimate sets the final price.

Serving Flatbush, NY – Our Local Coverage Area

We serve Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gelco Chimney Cleaning in Flatbush

Service Areas Near Flatbush

We cover Gelco cap work across Flatbush and the surrounding neighborhoods, including Flatbush itself as our main coverage area, plus Bay Ridge, Dyker Heights, Borough Park, Sunset Park, Bensonhurst and Kensington. We also work on Gelco caps in Midwood and the rest of central Brooklyn. For the full range of Gelco cap and component service, our team covers each of these areas with the same inspection-first process.

Book Your Gelco Service in Flatbush Today

If your Gelco cap is rusted, loose, oversized for a spalled flue, or sitting on a shared Flatbush stack and you’re not sure who covers what, call (855) 551-0049. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and we’ll tell you what can wait and what can’t. The written estimate sets the final price.

Written by the team at Chimney Sweep Bay Ridge.

Need Chimney Cleaning help in Flatbush? Licensed & insured · free written estimates
Call (855) 551-0049
Local Service Coverage
Chimney Sweep Bay RidgeChimney Sweep Dyker HeightsChimney Sweep Borough ParkChimney Sweep Sunset ParkChimney Sweep BensonhurstChimney Sweep KensingtonChimney Sweep South BeachChimney Sweep RosebankChimney Sweep StapletonChimney Sweep St. GeorgeChimney Sweep MidwoodChimney Sweep GravesendChimney Sweep Coney IslandChimney Sweep Carroll GardensChimney Sweep Red HookChimney Sweep FlatbushChimney Cap & Crown Bay RidgeChimney Cap & Crown Dyker HeightsChimney Cap & Crown Borough ParkChimney Cap & Crown Sunset ParkChimney Cap & Crown BensonhurstChimney Cap & Crown KensingtonChimney Cap & Crown South BeachChimney Cap & Crown RosebankChimney Cap & Crown StapletonChimney Cap & Crown St. GeorgeChimney Cap & Crown MidwoodChimney Cap & Crown GravesendChimney Cap & Crown Coney IslandChimney Cap & Crown Carroll GardensChimney Cap & Crown Red HookChimney Cap & Crown FlatbushChimney Repair Bay RidgeChimney Repair Dyker HeightsChimney Repair Borough ParkChimney Repair Sunset ParkChimney Repair BensonhurstChimney Repair KensingtonChimney Repair South BeachChimney Repair RosebankChimney Repair StapletonChimney Repair St. GeorgeChimney Repair MidwoodChimney Repair GravesendChimney Repair Coney IslandChimney Repair Carroll GardensChimney Repair Red HookChimney Repair FlatbushFireplace Repair Bay RidgeFireplace Repair Dyker HeightsFireplace Repair Borough ParkFireplace Repair Sunset ParkFireplace Repair BensonhurstFireplace Repair KensingtonFireplace Repair South BeachFireplace Repair RosebankFireplace Repair StapletonFireplace Repair St. GeorgeFireplace Repair MidwoodFireplace Repair GravesendFireplace Repair Coney IslandFireplace Repair Carroll GardensFireplace Repair Red HookFireplace Repair FlatbushChimney Inspection Bay RidgeChimney Inspection Dyker HeightsChimney Inspection Borough ParkChimney Inspection Sunset ParkChimney Inspection BensonhurstChimney Inspection KensingtonChimney Inspection South BeachChimney Inspection RosebankChimney Inspection StapletonChimney Inspection St. GeorgeChimney Inspection MidwoodChimney Inspection GravesendChimney Inspection Coney IslandChimney Inspection Carroll GardensChimney Inspection Red HookChimney Inspection Flatbush

Request a Free Estimate in Flatbush

Tell us what you need - Chimney Sweep Bay Ridge responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7