Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Sweep for Bay Ridge Homeowners
If your fireplace has started smoking back into the room, or the glass doors stay sooty no matter how often you wipe them, the flue is telling you it’s overdue. In Bay Ridge, most of the housing stock is older, and older chimneys collect creosote in layers that a flashlight won’t reveal. We’re a chimney-only company, not a roofer or a general contractor who adds sweeps to the van. Our technicians have up to 11 years of experience, and we work from the inspection outward, so you know what’s actually in the flue before anyone quotes a repair. Most sweeps can be booked same-day. Call (855) 551-0049. We answer 24/7.
What Our Chimney Sweep Service Includes
A sweep here means more than a brush down the flue. Every visit covers the firebox, the smoke chamber, the damper, and the flue, plus a visual check of the cap and crown from the roofline. If we find a problem, you see the evidence before we recommend anything.
Level 1 Inspection
A Level 1 inspection is the visual check that comes with a routine sweep: firebox, damper, flue interior as far as the eye can reach, cap, and crown. You need one whenever the system is in regular use and nothing has changed. We perform it as part of every annual visit, and we write down what we find so you have a record year to year.

Level 2 Inspection
A Level 2 inspection goes further, using a camera to look at the entire flue from top to bottom, including the parts a visual check can’t reach. It’s the right call after a chimney fire, after any change to the appliance or fuel type, or when you’ve just bought a home and don’t know the chimney’s history. We walk you through the footage on the spot, and you get a photo report afterward.

Creosote Removal
Creosote is the tar-like residue left by wood smoke, and it builds up in stages, from a light dusting to a glazed, hardened layer that a standard brush skips over. Removing it properly means matching the tool to the stage: nylon for light buildup, poly or steel for heavier deposits, and chemical treatment when the glaze is stubborn. We assess the stage before we start, so you’re not paying for a heavy removal when a simple sweep will do.

Soot Removal
Soot is the powdery black residue that coats the firebox walls, the damper, and the smoke shelf above it. Left alone, it stains the masonry, dulls the glass doors, and finds its way into the room whenever the fire is lit. We vacuum the firebox and smoke chamber with a HEPA setup and wipe down the doors and surround as part of the visit, so the room is left clean.
Annual Sweep
An annual sweep keeps the flue clear during the heavy burning months and gives you a yearly record of the chimney’s condition. If you burn wood regularly, the chimney should be swept once a year, and more often if you burn a lot or use unseasoned wood. We book these as a standing visit so the work doesn’t get pushed to the end of the season. A chimney sweep here is a booked appointment, so plan it before the first cold snap rather than after the first smoke-back.
Fireplace Cleaning
Fireplace cleaning covers the parts a flue sweep leaves alone: the firebox floor, the grate, the glass doors, the surround, and the hearth. It’s the service that makes the room usable again after a long season of burning. We clean wood-burning and gas fireplaces, and we check the gas log set’s connections and the damper position while we’re there.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Sweep
We specify the right material for the job, which means we work with a curated roster of professional chimney supply brands rather than whatever a lumber yard happens to carry. HeatShield is the ceramic resurfacing system we use when a flue liner has cracks but doesn’t yet need full replacement. It restores the liner’s surface from the inside and extends its life without an expensive reline. Gelco is the brand we reach for on crown and cap work where the material has to hold up to freeze-thaw cycles. We also install and service Olympia Chimney components for caps and liners, and Famco for the venting and cap hardware that fits older flues.
Knowing these systems matters most when a flue isn’t straight. A chimney with bends or offsets will turn away a contractor who only fits rigid liners, and that’s where DuraFlex flexible liner capability earns its place in the toolbox. It also means we can tell you when a HeatShield resurfacing will solve the problem and when a full reline is the honest answer. Whether your system uses one of these brands or any other make, we can help.
Signs You Need Chimney Sweep Right Now
Some of these are nuisances. A couple are genuinely dangerous. Know which is which.
- Smoke rolling back into the room. A blocked or heavily coated flue can’t pull smoke up and out, so it comes back through the damper. This is the most common sign of a flue that’s overdue for a sweep.
- A strong, sour smell on warm days. Creosote and soot release odor when the chimney warms up without a fire drawing. The smell usually means the buildup has reached the point where a brush won’t be enough on its own.
- Black or shiny deposits on the flue walls. Glazed creosote is the stage that ignites. If you can see a hard, tar-like coating on the flue, stop burning until it’s been assessed.
- Debris in the firebox after a storm. Twigs, leaves, and nesting material block the flue and can catch sparks. A cap usually solves the cause, but the flue needs clearing first.
- It’s been more than a year since the last sweep. If you can’t remember the last cleaning, the risk has been building unmeasured. A sweep and Level 1 inspection will tell you where the system actually stands.
Carbon monoxide is the risk that doesn’t announce itself. A blocked or damaged flue can let combustion gases back into the living space, and those gases are odorless. That’s why we treat a flue blockage as a same-day job rather than something to schedule for later.
Our Chimney Sweep Process – Step by Step
Here’s how a visit goes, from the phone call to the photo report.
- 1
We book the sweep and confirm the scope. We ask what you burn, how often, and whether anything has changed since the last service. That tells us whether a standard sweep covers it or whether a higher-level inspection is the right starting point.
- 2
We protect the room before we start. Drop cloths go down, the firebox is sealed with a vacuum connection, and the HEPA unit runs the whole time. You shouldn’t find soot on the hearth or the furniture when we’re done.
- 3
We sweep the flue from the bottom up, stage by stage. The brush type depends on what we find: nylon for light ash, poly or steel for heavier deposits, chemical treatment for glazed creosote. If we hit the hardened stage, we stop and explain the options before continuing.
- 4
We inspect with a camera, not just a flashlight. A Level 2 visit runs a camera through the entire flue and records the footage. We show you the liner condition, any offset or crack, and the state of the cap and crown.
- 5
We hand you a written report and a photo record. You get what we found, what can wait, and what shouldn’t. If a repair is needed, the estimate is free and the price is set per job by the written estimate. Nothing is recommended without camera evidence you can see for yourself.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Sweep Cost in Bay Ridge?
A typical chimney sweep in Bay Ridge runs $150 – $300 and covers the flue, firebox, damper, and a Level 1 inspection. A Level 2 inspection with camera runs $200 – $400 on its own, and a combined sweep plus Level 2 usually lands in the $300 – $500 range. Creosote removal at the glazed stage costs more, typically $300 – $700, because it needs chemical treatment and more time.
| Service | Typical estimate | What drives the range |
|---|---|---|
| Standard sweep + Level 1 | $150 – $300 | Stages of creosote, number of flues |
| Level 2 inspection (camera) | $200 – $400 | Flue access, roofline condition |
| Glazed creosote removal | $300 – $700 | Stage of buildup, chemical treatment needed |
| Fireplace cleaning | $100 – $200 | Wood vs. gas, soot depth, door glass |
Longer flues, multiple flues in one stack, and restricted roof access all push the estimate toward the upper end. Basement cleanouts and chimneys running through interior walls often need extra time. The simplest way to avoid overpaying is to ask for the written estimate before any work begins and to ask what stage of creosote was found. If a sweep is all you need, we’ll say so. Our inspection is the honest starting point, not a sales funnel. A written estimate sets the final price, and there’s no charge for it. Call (855) 551-0049.
Chimney Sweep Near Bay Ridge – Our Service Area
We cover Bay Ridge and the neighborhoods around it, including Dyker Heights, Borough Park, Sunset Park, Bensonhurst, Kensington, Midwood, and Gravesend, plus the Staten Island stops across the bridge at St. George, Stapleton, Rosebank, and South Beach. A chimney sweep visit booked from Dyker Heights or chimney sweep work in Borough Park starts with the same phone call and the same written estimate. Our technicians have up to 11 years of experience across these neighborhoods, and we schedule the visit around your area rather than by route.
Serving Bay Ridge, NY – Our Local Coverage Area
We serve Bay Ridge and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Sweep in Bay Ridge
A chimney sweep is a professional cleaning of the flue, firebox, and smoke chamber to remove creosote and soot, followed by a Level 1 visual inspection of the whole system. It’s not just a brush down the flue; it includes the damper, cap, and crown check. A sweep is the maintenance step that catches problems before they turn into repairs. Call (855) 551-0049 for an exact quote on your system.
A standard sweep with a Level 1 inspection usually takes about an hour. A combined sweep and Level 2 inspection runs closer to two hours, and glazed creosote removal can take longer if chemical treatment is needed. Setup and cleanup are part of that time, not extra. If your chimney is accessible and in reasonable shape, most visits finish within the window we book.
A standard sweep in Bay Ridge typically runs $150 – $300, and a camera inspection runs $200 – $400. Combining them usually costs less than booking separately. The final number depends on the flue’s condition, length, and how many flues you have. Call (855) 551-0049 for an exact quote. Estimates are free.
Yes. We work with HeatShield ceramic resurfacing for liner cracks that don’t yet require full replacement, and we install and service Olympia Chimney components for caps and liners. We also handle Gelco, Famco, and DuraFlex systems where those materials are the right fit. Whether your system uses one of these brands or another make, we can help.
We book same-day sweeps when the schedule allows, especially for blockages and smoke-back calls. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. We’re closed on Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (855) 551-0049 and we’ll find you the soonest slot.
The local pro we connect you with stands behind the work, and any warranty terms are confirmed in writing at the time of booking. We don’t promise warranty language over the phone that isn’t in the estimate. What you can count on is that the work is done by a licensed and insured professional as their state requires. Call (855) 551-0049 to ask about the specifics for your job.
Clear the hearth and a couple of feet in front of the fireplace, and move any fragile items off the mantel. Make sure we can reach the fireplace and, if needed, the roof access without obstacles. If you have a gas log set, leave the key or remote where we can find it. Tell us about any past chimney fires or appliance changes when you book, since that changes what inspection level is right.
Schedule Your Chimney Sweep Service in Bay Ridge Today
Book your sweep before the burning season gets going, not after the first smoke-back. We’ll show you camera footage, give you a written estimate before any work starts, and tell you plainly when a repair can safely wait. Call (855) 551-0049 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Chimney Sweep Bay Ridge handles the whole system, from sweep to repair.
Written by the team at Chimney Sweep Bay Ridge.