Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Cap & Crown for Bay Ridge Homeowners
A missing cap and a cracked crown are the two most common ways water gets into a chimney in Bay Ridge. Water finds the seam where the crown meets the flue, freezes, and widens it a little each winter. Left alone, that cycle turns a hairline crack into a masonry repair. We’re a chimney-only specialist, and our technicians have up to 11 years of experience with caps and crowns on the wood-burning and gas fireplaces common in Bay Ridge’s older row houses and detached homes. We install and repair both, using materials from names like Gelco and Olympia Chimney. Call (855) 551-0049 to book a sweep or an inspection. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Chimney Cap & Crown Service Includes
Cap and crown work covers the top of your chimney system, and the two parts do different jobs. The cap sits above the flue and keeps out rain, birds and debris. The crown is the sloped concrete or mortar surface on top of the chimney that sheds water away from the masonry. We handle both, from a straightforward replacement to a custom cap for an unusual chimney in a Sunset Park or Bensonhurst building.
Cap Installation
A chimney cap is the metal or mesh cover over the flue that keeps rain, snow and animals out while letting smoke escape. You need one if the top of your chimney is open, and many Bay Ridge chimneys are, especially on houses where a cap was never fitted. We size the cap to the flue, install it on a proper mounting, and make sure it doesn’t interfere with draft.

Cap Replacement
Caps rust, bend, and sometimes come loose in a storm. A damaged cap no longer does its job, and a loose one can rattle or block the flue. When we find a cap that’s past its working life, we’ll show you why and replace it with a new one sized to the flue, installed with Olympia Chimney components where they fit the job.

Crown Repair
The crown is the sloped surface on top that pushes water away from the brick. When it cracks or crumbles, water gets in and the masonry starts to fail. We repair cracked and spalling crowns by removing the loose material, rebuilding the slope, and sealing it so water runs off the way it should rather than soaking down into the chimney.

Crown Coating
Crown coating is a protective layer applied over a crown that’s still sound but showing early wear. It seals small cracks before they grow and adds a few more years to a crown that doesn’t need full replacement yet. We use coating as a preventive step when the crown is sound, not as a way to cover a crown that’s already failing.
Multi-Flue Cap
A multi-flue cap covers a chimney with more than one flue in a single unit. Bay Ridge homes with a fireplace plus a furnace flue often have these. If your cap has failed over a shared chimney, we measure the flues, fit a single cap that covers all of them, and make sure each flue still vents properly.
Custom Cap
Some chimneys don’t take a standard-size cap. Oversized flues, odd shapes, and masonry that’s out of square all call for a custom build. We measure on site and order or build a cap sized to the actual opening, so you get a cover that fits rather than one forced to fit and leaking around the edges.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Cap & Crown
We work with professional chimney supply brands because the material quality at the top of the chimney is what decides how long the work lasts. Gelco is a name we reach for on crown and masonry work, and it holds up well in the freeze-thaw cycles that come through Brooklyn. Olympia Chimney covers the cap side, and we fit their components where the flue size and chimney shape call for them. On larger jobs we may also bring in Famco parts where they suit the installation.
Caps and crowns are also where our other professional-grade brands come in. HeatShield ceramic resurfacing restores a cracked flue liner from the inside, which often makes sense to do at the same time as crown work so the whole top of the system is sound. Where a flue has bends or offsets, DuraFlex flexible liner systems let us line a chimney that a rigid liner would stall on. Copperfield provides another option for cap components on certain jobs. Whether you have one of these brands on your chimney or any other make, we can help.
Signs You Need Chimney Cap & Crown Right Now
- Water stains on the ceiling near the chimney. A stain that shows up after rain usually points to a crack in the crown or a gap around the flue. The water is getting past the top of the chimney and finding its way down.
- Crumbling mortar on the crown. If the sloped surface on top is flaking, pitted or cracked, it isn’t shedding water anymore. That water is soaking into the brick below, and winter freezes turn those small cracks into bigger ones.
- A missing or rusted cap. An open flue lets rain straight in and gives birds, squirrels and raccoons a way down. A rusted-through cap does the same thing, just more slowly.
- Rusted damper or a musty smell in the firebox. Water coming down the flue collects at the damper and in the firebox. A damper that’s sticking and rusting is often the first sign the cap or crown has failed.
- Chips of masonry on the roof or in the yard. Falling pieces of crown or brick mean the crown is breaking down and the chimney top is losing structure. It’s worth having it inspected before the next freeze.
Our Chimney Cap & Crown Process – Step by Step
- 1
We inspect the top of the chimney and the flue. The job starts with the crown and cap on the roof and the flue from the inside. We check the crown for cracks and spalling, the cap for rust and fit, and the flue for damage that would affect the cap work.
- 2
We show you what we found. You get a clear explanation and photos of the crown and cap, so you can see the condition for yourself. If the crown can safely wait, we’ll tell you that instead of pushing a repair.
- 3
We agree on the material and the price. We specify the right material for the job, whether that’s a Gelco crown product, an Olympia Chimney cap, or a custom build. The written estimate sets the price before any work starts.
- 4
We do the work. For a crown, we remove loose material, rebuild the slope and make sure it drains away from the flue. For a cap, we fit and secure it with the right mounting for your flue size and chimney shape.
- 5
We check the result and clean up. Each installation is checked for fit, drainage and draft before we leave. The same company that inspects your chimney does the repair, so there’s no handoff gap.
If you want the full scope of what a dedicated chimney company handles, from routine work to structural repair, see our Chimney Sweep Bay Ridge page. Cap and crown work sits alongside repair and relining, and we can take on all of it on one visit if the inspection shows more than one issue.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Bay Ridge?
A typical cap installation in Bay Ridge runs $185 to $420, and a crown repair runs $300 to $850 depending on the size of the crown and how much of it has to be rebuilt. A multi-flue cap for a shared chimney costs more than a single-flue cap, and a custom cap sized to an irregular opening sits above the standard range. Crown coating, done as preventive work on a sound crown, is the least expensive option at $150 to $300.
| Service | Typical Bay Ridge Range |
|---|---|
| Cap installation (single flue) | $185 – $420 |
| Cap replacement | $185 – $420 |
| Multi-flue cap | $350 – $650 |
| Custom cap | $400 and up, by measurement |
| Crown repair | $300 – $850 |
| Crown coating | $150 – $300 |
What moves the price: the number of flues, the height and access of the chimney, how much of the existing crown has to come off, and whether the material is standard or custom. To avoid overpaying, ask for the scope in writing, with the cap or crown material named and the size stated. A free estimate from us includes a look at the crown and cap, photos, and a written price. If the crown can safely wait until spring, we’ll say so.
Chimney Cap & Crown Near Bay Ridge – Our Service Area
We work across Bay Ridge and the neighborhoods around it, including Dyker Heights, Borough Park, Sunset Park, Bensonhurst and Gravesend. If you’re on the other side of the harbor, we also cover Staten Island neighborhoods like Rosebank, Stapleton and St. George, as well as Kensington, Midwood and South Beach. For the full scope of our cap and crown work across the area, see our chimney cap & crown page. Requests are booked into the next opening, and we answer 24/7 when you call.
Cap and crown work is the same trade across all of these neighborhoods, and we bring the same materials to each: a chimney cap & crown on a brick rowhouse, a chimney cap & crown on a larger building with a shared flue.
Serving Bay Ridge, NY – Our Local Coverage Area
We serve Bay Ridge and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Cap & Crown in Bay Ridge
Chimney cap and crown work covers the two parts at the top of your chimney that keep water out. The cap is the metal or mesh cover over the flue, and the crown is the sloped concrete or mortar surface around its base. Together they protect the masonry and flue from rain, snow and animals. Call (855) 551-0049 for a free estimate on either.
Most single-flue cap installations take an hour or two, and a crown repair takes most of a day depending on how much has to be rebuilt. Multi-flue and custom caps run longer because of the measuring and fit. We’ll give you a realistic time when we book the job, not a guessed one. Call (855) 551-0049 to talk it through.
Cap installation and replacement typically run $185 to $420, and crown repair typically runs $300 to $850, depending on flue count, chimney height and how much of the crown needs rebuilding. A custom cap is priced by measurement. The written estimate sets the final price, and estimates are free. Call (855) 551-0049 for an exact quote.
Yes. We fit Gelco products on crown and masonry work and Olympia Chimney components on caps. We also work with HeatShield for flue liner restoration, which often pairs well with crown work so the whole top of the system is sound at once. Whether you have one of these brands on your chimney or another make, we can help.
Same-day appointments are possible when the schedule allows, and we don’t promise same-day service because some jobs need to be booked. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (855) 551-0049 to book.
Warranty terms depend on the material and the job, and we confirm them in writing with your estimate rather than making a blanket promise. Ask for the terms on the specific cap or crown material being installed. We’ll put them in writing before you commit. Call (855) 551-0049 with questions about a specific installation.
Not much is needed from you. We need access to the roof and to the firebox inside, so clear the area around the hearth and let us know of any pets. If you have photos of the damage you’ve noticed, they help us plan. Clear the area around the chimney base on the roof side if there’s furniture or items stored there. Call (855) 551-0049 to confirm the booking details.
Schedule Your Chimney Cap & Crown Service in Bay Ridge Today
If the top of your chimney is open, cracked or rusting, don’t wait for the next hard freeze to make it worse. We’ll look at the cap and crown, show you what we found, and give you a written estimate with the material named and the price set. Estimates are free and there’s no obligation. Call (855) 551-0049. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bay Ridge.