Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Borough Park
If water is staining the ceiling plaster under a chimney stack, or a cap has rusted through on a multi-family brick building, you’ve found the right page. Chimney Sweep Bay Ridge installs, replaces and repairs chimney caps and crowns across Borough Park, from the dense blocks near 13th Avenue to the attached brick rows closer to 50th Street. We know this housing well: tall, narrow buildings packed shoulder to shoulder, exterior masonry stacks venting boilers, and freeze-thaw winters that punish any crown that wasn’t sealed right the first time. Every cap and crown we quote is written down and agreed before we book. Our technicians have up to 11 years of experience. Call (855) 551-0049. We answer 24/7.
Why Borough Park Homeowners Call Chimney Sweep Bay Ridge for Chimney Cap & Crown
Borough Park is a borough of brick buildings, and the chimneys here take a beating that fireplace-only suburbs never see. We’re a chimney-only specialist, which matters when a stack is venting high-efficiency boilers alongside older flues and the crown is the one thing standing between the flue and the weather. We work with products from professional brands like Olympia Chimney and Gelco, and we hold HeatShield in our toolkit for crown and flue restoration work that general handymen don’t offer.
We serve Borough Park homes with the same straight approach everywhere: a camera inspection, a photo report you can look at yourself, and a clear answer on what needs doing now versus what can safely wait. We don’t hand off between companies, so the same team that inspects your stack can repair or coat the crown. Our technician experience runs up to 11 years, and we’re fluent in the building types you’ll find from 13th Avenue to the edge of Borough Park near 36th Street. Estimates are free, and the written price sets the final cost.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Borough Park
Most of what we do in Borough Park falls into four jobs, and they tend to flow from the same problem: water getting in through the top of an exposed masonry stack. Here’s how each one plays out on these buildings.
Cap Installation
A proper cap keeps rain, snow and animals out of every flue in the stack. On Borough Park’s multi-family buildings, that often means a multi-flue cap sized to cover several openings at once, including the flue venting a high-efficiency boiler. When you’re ready to protect a stack, our chimney cap & crown team measures the flue openings and matches the cap to the actual draft the boilers need.

Cap Replacement
Rusted-through caps and loose caps with failed seals are among the most common things we replace in Borough Park. A cap that’s too small or poorly sealed can restrict draft on a boiler flue, which raises carbon monoxide spillage risk in a densely occupied building. We swap the old cap for one that fits the openings and clears correctly, and we document the old cap’s condition with photos so you can see why the replacement was needed.

Crown Repair
The crown is the sloped concrete top of the chimney, and Borough Park’s freeze-thaw cycles crack it faster than most people expect. A cracked crown lets water wick into the masonry, which then spalls and damages the flue liners in shared boiler stacks. We repair crowns on the attached brick buildings throughout Borough Park so the top sheds water the way it should again.

Crown Coating
When a crown is sound but showing hairline wear, a crown coating seals it before it becomes a repair. This is the proactive option on an exterior brick stack that’s already been through a few winters. We prep the surface and apply a protective coating that keeps water out of the masonry, which is cheaper than waiting for a full crown repair.
Trusted Brands We Service in Borough Park
Caps and crowns are only as good as the components behind them. We work with professional-grade brands including Olympia Chimney, Gelco and Famco, and we use HeatShield ceramic resurfacing where a liner needs restoration without a full replacement. These are trade-account materials, not the stock a generalist picks up at a box store. On the older, custom-sized stacks common in Borough Park, that means we can match a multi-flue cap to uneven openings rather than forcing an off-the-shelf model that clamps on but never seals right.
Common Chimney Cap & Crown Problems We See in Borough Park Homes
These are the failures that come up most on Borough Park’s attached brick and apartment buildings:
- Crowns cracked by freeze-thaw cycles. Cold, damp winters and hot, humid summers work on the exterior masonry crown until hairline cracks open. Once they do, water reaches the flue liners in shared boiler stacks and the spalling begins.
- Missing or rusted caps on multi-flue chimneys. Many stacks in Borough Park have caps that have rusted through or slipped off entirely, letting rain and animals into flues that vent high-efficiency boilers alongside older clay-tile liners.
- Improperly sized or unsealed caps restricting draft. On a boiler flue, a cap that clamps down the opening can choke draft and raise carbon monoxide spillage risk in a building with several apartments on one stack.
- Soot and creosote buildup in shared boiler flues. Years of soot and first-degree creosote collect in masonry stacks that serve multiple apartments, which is a chimney-fire and flue-integrity concern worth catching at inspection.
Pricing for Chimney Cap & Crown in Borough Park, NY
Pricing in Borough Park is driven by how many flues a cap has to cover, whether the crown needs a repair or just a coating, and how much of the masonry is spalled. Here are typical estimated ranges for this market:
| Service | Typical estimated range |
|---|---|
| Cap installation (single flue) | $250 – $550 |
| Multi-flue cap installation | $400 – $900 |
| Cap replacement | $275 – $650 |
| Crown repair | $450 – $1,200 |
| Crown coating | $300 – $700 |
The written estimate sets the final price, and every estimate is free. We’ll walk you through what we found on camera and tell you plainly if part of the work can wait.
See the difference
Before
After
Before
After
Before
AfterWhy Cap-and-Crown Work in Borough Park Is Also a Carbon Monoxide Check
Here’s what sets Borough Park apart from most of the city: many chimneys here vent high-efficiency boilers alongside older flues in the same stack. A high-efficiency boiler puts very different venting demands on a flue than a fireplace does, and the cap and crown at the top are what keep that stack breathing and dry. When a crown cracks or a cap is the wrong size, the consequences aren’t only cosmetic. An improperly sealed cap can restrict draft on a boiler flue, and a compromised flue in a stack serving several apartments raises carbon monoxide spillage risk for everyone under it. That’s why a cap-and-crown visit in Borough Park is, in practice, a flue-integrity inspection, and it’s the kind of check you want done by someone who understands boiler venting, not just fireplace chimneys. Our Borough Park service covers the full range of these stacks, from the near-13th Avenue multi-family buildings to the smaller brick rows on the side streets.
What Actually Happens on a Cap and Crown Job in Borough Park
In Borough Park’s attached brick buildings, a cracked or missing cap often goes unnoticed until water stains show on ceiling plaster or a boiler flue starts drafting poorly. The usual cause is freeze-thaw spalling on the exterior masonry crown and cap, compounded by years of soot and first-degree creosote in shared boiler flues. On a typical job, a qualified local pro performs a camera inspection of the flue, documents the crown and cap with photos, then replaces the cap with a multi-flue model and repairs or coats the crown to seal out moisture. Work like this is usually scheduled rather than same-day, because older stacks often need custom sizes matched before the cap goes on. You’ll see the photos and get the written price before we book anything.
We Also Serve Cities Near Borough Park
The same cap and crown work covers the neighborhoods adjoining Borough Park. We serve homeowners in Sunset Park, Kensington, Dyker Heights and Bensonhurst, bringing the same camera inspection and photo report to their attached brick buildings and multi-family stacks. If you’re just over the line from Borough Park, the process and the written estimate work exactly the same way.
Serving Borough Park, NY – Our Local Coverage Area
We serve Borough Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Borough Park
Once a year is a sensible baseline for a boiler flue, and more often if the stack shows spalling or draft problems. In a building venting high-efficiency boilers alongside older flues, the cap and crown are the top of the system and the first thing weather works on, so an annual look catches cracks before they reach the liners. Call (855) 551-0049 to book an inspection; estimates are free.
In most cases yes, a cap can be replaced from roof level without full scaffolding on a typical Borough Park attached brick house. The deciding factor is safe access to the stack and how much masonry the crown work involves. A professional will assess access at inspection and tell you what the job needs before quoting. Call (855) 551-0049 for an exact quote.
A photo report documents the flue openings, the old cap’s condition, and the crown before any work starts. For a multi-flue cap installation, it typically includes pictures of each flue the cap will cover, including the boiler flue, so you can see why the sizing matters. You get to review it before the work is scheduled. Call (855) 551-0049.
Often it can wait, but not always, and the difference is how deep the crack goes. A hairline crown crack can typically be scheduled and coated before it spreads, while a crown with open gaps or water already reaching the flue is worth addressing sooner. The camera inspection and photo report tell you which situation you’re in. Call (855) 551-0049 for an honest read.
Older multi-family stacks in Borough Park often have uneven flue openings and several flues at different heights, so a stock cap won’t seal or draft correctly. A custom or properly sized multi-flue cap matches the actual openings, which matters when one of those flues vents a high-efficiency boiler. That’s the kind of fit a chimney-only specialist measures for. Call (855) 551-0049 for an exact quote.
If your Borough Park stack needs a cap, a crown repair, or just an honest look at what’s up there, we’ll inspect it with a camera, show you the photos, and give you a written price before anything is booked. Call (855) 551-0049 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bay Ridge.