Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Flatbush
If rain is finding a way into your Flatbush chimney, the cap or crown is usually where it starts. We’re a chimney-only company that installs, replaces, and restores caps and crowns across Flatbush, and we know the housing stock here well: 1920s and 1930s brick rowhouses and pre-war apartment buildings with shared stacks, interior chases, and original terra cotta that’s been through a century of freeze-thaw. Our technicians have up to 11 years of experience, and the local pro we connect you with is licensed and insured as their state requires. Call (855) 551-0049. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Flatbush Homeowners Call Chimney Sweep Bay Ridge for Chimney Cap & Crown
Flatbush rowhouses and apartment houses don’t have neat, single-flue chimneys sitting on top of one home. They share party-wall stacks, hide chases behind plaster, and sit on roofs that require careful access from the Church Ave and Flatbush Ave corridors. Getting a cap or crown right here takes more than a ladder and a guess. We work on chimney systems exclusively, so when the inspection turns up a cracked crown wash or a flue-to-flue gap, we already know how these buildings are put together and can specify the right material for the job.
You’ll get a flat-price sweep agreed before booking, a camera inspection with a photo report you keep, and a clear answer about what can safely wait. Our technicians have up to 11 years of experience. We don’t pitch liner or masonry work you can’t verify, and we’re comfortable coordinating with a landlord or building owner when a shared stack needs attention on more than one unit. The local pro we connect you with is licensed and insured as their state requires, and our reputation in Flatbush rests on straight answers rather than upsells. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Flatbush
A cap keeps water, animals, and debris out of the flue. A crown sheds water off the top of the stack. In attached Flatbush housing, both have to account for the flue on the other side of the wall. Here’s what we handle.
Cap Installation in Flatbush
A properly sized cap keeps nor’easter rain from driving straight down an uncapped flue and lets exhaust vent freely. In Flatbush’s attached rowhouses, we size the cap for your flue and note whether the shared stack next door is still exposed. A missing cap on one side is often the beginning of a water problem on the other.

Cap Replacement in Flatbush
Old caps rust out, warp, or get knocked loose in storms, and a loose cap on a narrow shared stack can be a hazard on the roof below. We remove the failing unit and install a replacement built for the flue configuration and the draft the appliance needs, using components from Olympia Chimney where they fit the job.

Crown Repair in Flatbush
Original 1920s crowns were built with a mortar wash that cracks after decades of freeze-thaw. When water seeps behind a parged firebox, it spalls the terra cotta flue tiles and can open a path between flues. We rebuild the damaged crown with a proper slope to shed water away from the mortar joints.

Crown Coating in Flatbush
Where the crown is sound but worn, a coating restores the water-shedding surface without a full rebuild. In buildings where the roof is tricky to access or the stack is shared, coating is often the lower-impact option, provided the crown itself is still intact beneath. We’ll tell you which applies.
Trusted Brands We Service in Flatbush
We install products from Olympia Chimney, Gelco, and Famco, and we use HeatShield for flue restoration where cracks or spalling are found. We don’t claim parts stock on a truck; the right material gets sized and ordered for your stack, which means a slightly longer lead time and a better fit. Our background is with professional chimney industry brands, so you’re getting trade-grade components installed to spec, not a generic cap forced onto an irregular flue. When a crown repair or cap install reveals a liner issue underneath, our chimney cap & crown work stays in the same hands from inspection through repair.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Flatbush Homes
- Shared party-wall stacks. A cap sized for one flue leaves the neighbor’s flue exposed, and nor’easter rain drives into the shared chase, showing up as water stains in adjacent units. This is the most common cap issue in attached Flatbush rowhouses.
- Original 1920s terra cotta crowns. Freeze-thaw cracks the mortar wash, water seeps behind the parged firebox, and the terra cotta flue tiles spall. That same path becomes a cross-contamination route between flues.
- Dormant gas-converted flues. Many Flatbush homes switched from wood to gas, leaving flues unused. Without a cap, animals and debris block the flue, and the lack of draft lets creosote from an active neighboring flue migrate into the unused stack.
- Narrow shared stacks on tight streets. Access along the Church Ave and Flatbush Ave blocks is tight, and a properly fitted multi-flue cap has to clear the roof and the wall next door while still venting each unit correctly.
Pricing for Chimney Cap & Crown in Flatbush, NY
A typical cap installation in Flatbush runs $180 to $450, depending on flue size and whether it’s a single cap or a multi-flue assembly for a shared stack. Cap replacement runs $200 to $500. Crown repair, including rebuilding the wash with a proper slope, runs $400 to $1,100, and crown coating runs $350 to $850. Multi-flue and custom caps on irregular party-wall stacks sit at the higher end because each flue has to be sized. The written estimate sets the final price, and the estimate itself is free. We price per job, never by guesswork, and we’ll tell you plainly when a crown issue can safely wait.
We Also Serve Cities Near Flatbush
The same cap and crown work reaches the neighborhoods around us. If your building is just over the line into Kensington, Midwood, Borough Park, or Sunset Park, we can help, and the shared-stack logic carries over to attached housing across the wider Flatbush area. Call to confirm your street and we’ll set up the estimate.
Serving Flatbush, NY – Our Local Coverage Area
We serve Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Flatbush
You need one cap that covers every flue on the shared stack, not a single-flue cap on your side. A properly sized multi-flue cap vents both units and keeps rain out of the whole chase. In attached Flatbush rowhouses, a cap that stops at the party wall leaves the neighbor’s flue exposed and lets water in through the shared stack. Call (855) 551-0049 to set up an assessment of both flues.
You usually can’t tell from the ceiling stain alone, because the water travels down the shared chase. A camera inspection of both flues and the crown is the reliable way to trace it. A damp patch near the party wall or a smoke odor from a neighboring flue points to the shared stack, but only inspection confirms which side. Call (855) 551-0049 for an inspection with a photo report.
A crown coating fixes the crown, not the spalling tiles underneath it. If water has already gotten behind the parged firebox and spalled the terra cotta, the coating stops further intrusion but the flue may need restoration, which is where HeatShield ceramic resurfacing comes in. We won’t coat over a problem and call it solved. Call (855) 551-0049 so we can look at both the crown and the flue.
A cap helps, but the smoke smell is often a capped-flue imbalance rather than just an open top. When one flue on a shared stack is uncapped or blocked, creosote and smoke can migrate into the unused stack next to it. Fixing it usually means a multi-flue cap plus checking each flue’s draft. Call (855) 551-0049 and we’ll trace the source before recommending the fix.
It’s a single housing that sits over all the flues on the stack, with venting for each one and a water-shedding top. On a narrow shared stack it’s built to the exact footprint so it clears the wall next door. Custom sizing handles the irregular stacks common on the Flatbush Ave and Church Ave blocks. The written estimate confirms the fit and price. Call (855) 551-0049 for a free estimate.
If a cap or crown on your Flatbush building is letting water in, the fix starts with an honest inspection and a written, flat-price estimate you can read before anything is booked. Call (855) 551-0049 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bay Ridge.
Key Takeaways
- Flatbush rowhouses often share party-wall chimney stacks, so a cap on one side can leave the neighbor’s flue exposed.
- Typical Flatbush pricing: cap installation $180 to $450, cap replacement $200 to $500, crown repair $400 to $1,100, crown coating $350 to $850.
- Freeze-thaw and humid summers crack original terra cotta crowns and spall flue tiles, which is why coating or rebuilding the crown matters.
- Every job starts with a camera inspection and a photo report, and we tell you when a repair can safely wait.