Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Kensington
A chimney cap and crown job in Kensington usually runs a few hundred to a couple thousand dollars depending on what’s failed, and the work itself is often a half-day once the right components are on site. We handle cap installation, cap replacement, crown repair, crown coating, multi-flue caps, and custom caps for the brick rowhouses and Tudor homes that define this neighborhood. We know what the weather around here does to masonry. Call (855) 551-0049 for a free estimate.
Why Kensington Homeowners Call Chimney Sweep Bay Ridge for Chimney Cap & Crown
We’re a chimney-only company, which matters in a place like Kensington where the housing stock has its own quirks. A generalist roofer or mason can slap mortar on a crown; we read the whole stack first, because a cracked crown on a party-wall chimney is rarely just one unit’s problem. Our technicians have up to 11 years of experience with exactly this kind of masonry and liner work.
Kensington customers tell us the thing they value most is a straight answer about what actually needs fixing versus what can wait. We deliver the inspection findings first, with camera evidence, then talk repair. We serve Kensington and the surrounding blocks regularly, so we know the narrow sidewalks, the shared stacks, and how access works on these properties. Fast dispatch from 7am to 7pm, Sunday through Friday. We answer 24/7.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Kensington
These are the four jobs Kensington homeowners ask us about most. Each starts with the same thing: a look at the whole stack, not just the part that’s leaking.
Cap Installation in Kensington
A properly sized cap keeps rain, birds, and wind-driven debris out of the flue. On Kensington’s older stacks, that means measuring the actual flue opening rather than assuming a standard size fits. We install caps built for the job, using components from Olympia Chimney where the fit calls for it.

Cap Replacement in Kensington
When a cap is rusted through, undersized, or came loose in a storm, replacement is usually the simplest fix. That’s common on the 1920s – 30s Tudors near Ocean Parkway, where an original cap has weathered decades of coastal-storm wind. A new cap seated on a proper base seals the top of the flue again.

Crown Repair in Kensington
The crown is the concrete or mortar cap at the very top of the brickwork, and it’s the first thing NYC freeze-thaw cycles tear apart. Hairline cracks let meltwater in; a refreeze pushes them wider. We repair crowns that are still sound underneath and rebuild the ones that aren’t, using Gelco products for the masonry work.

Crown Coating in Kensington
Where a crown has surface spalling but is structurally intact, a protective coating can extend its life and keep water out. This is a good fit for Kensington’s early-20th-century brick chimneys that have good bones but worn faces. We specify the coating to match the crown’s condition, not as a blanket treatment.
Trusted Brands We Service in Kensington
We work with professional chimney industry brands: HeatShield for flue liner restoration, Gelco for crown masonry, Olympia Chimney for caps and components, and Famco where a project calls for it. These are the materials trade accounts use, and we can spec them for Kensington jobs. We don’t claim to stock parts locally; we source what the job needs and get it in place. Where a flue has bends or offsets that complicate a cap or liner fit, our DuraFlex capability lets us work with those configurations rather than turning the job away.
Common Chimney Cap & Crown Problems We See in Kensington Homes
- Crown spalling and hairline cracks from freeze-thaw. NYC’s winter cycles let meltwater into the masonry, then a refreeze pushes the crown apart. It starts small and widens over a season or two.
- Wind-driven storm rain defeating a loose or undersized cap. Coastal-storm wind forces rain past an ill-fitting cap, sending water down the clay flue liner to stain ceilings and rust the damper.
- Cracked shared crowns on party-wall stacks. Kensington rowhouses often share a chimney stack with an older neighbor’s flue. One unit’s inspection can only half-reveal a cracked shared crown, since the adjacent flue is capped separately.
- Flashing failures that show up as a ceiling stain. Water at the roofline doesn’t always come from the crown. Failed flashing around the chimney is a separate failure point, and it needs checking alongside the crown and cap.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Kensington, NY
Prices are estimates and the written estimate sets the final number. A typical cap replacement in Kensington runs $250 – $550 depending on cap size and flue configuration. Crown repair generally runs $350 – $900, and a full crown rebuild on a larger or shared stack can reach $1,200 – $1,800. Crown coating typically runs $300 – $650. Multi-flue caps and custom caps fall on the higher end because they’re built to fit. What moves the price most is access, the number of flues under one crown, and how much masonry has to come off before the repair can go on. We confirm everything before booking, and the estimate is free.
We Also Serve Cities Near Kensington
Beyond Kensington, our chimney cap & crown team covers Flatbush, Borough Park, Midwood, and Sunset Park. These neighborhoods share the same early-20th-century rowhouse stock and the same post-storm cap and crown problems, so the work translates directly. If you’re just over the line from Kensington, we can help.
Serving Kensington, NY – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Kensington
Yes, a multi-flue cap can cover both flues under a single base, provided the crown beneath it is sound enough to anchor to. On shared Kensington stacks, we measure both flue openings before ordering, because a cap sized to one side alone won’t seal the other. If the shared crown is cracked, we review it first. Call (855) 551-0049 for an exact quote – estimates are free.
It can be either, and often it’s both, so the only reliable way to tell is to check the crown and the flashing at the roofline side by side. A stain that appears after wind-driven rain usually points to a cap that let water in, while a stain that shows up during steady rain can point to flashing. We inspect both before recommending anything. Call (855) 551-0049 for an exact quote – estimates are free.
It comes down to the condition of the crown underneath: a sound crown with a damaged cap usually just needs the cap replaced, while a crown with cracks or spalling needs repair regardless of the cap. We inspect the crown surface and the mortar joints before deciding. Nothing gets recommended without camera evidence you can see. Call (855) 551-0049 for an exact quote – estimates are free.
Before the first fire, have the cap, crown, and flashing checked together, plus the flue liner and any creosote buildup in the smoke chamber and damper area. On a Tudor-era stack, the crown has likely seen decades of freeze-thaw, so it’s the first thing to review. A pre-season inspection catches it before it becomes a leak. Call (855) 551-0049 for an exact quote – estimates are free.
Creosote itself doesn’t damage the cap or crown, but heavy buildup tells you how the flue is running and whether airflow is being restricted by a badly fitting cap. A clogged or undersized cap can slow draft and let creosote accumulate faster. We check both during the same visit. Call (855) 551-0049 for an exact quote – estimates are free.
Book Your Kensington Chimney Cap & Crown Estimate
If wind and water have gotten into your Kensington chimney, don’t wait for the next storm to make it worse. We inspect the cap, crown, and flashing together and tell you plainly what needs fixing and what can wait. Call (855) 551-0049 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bay Ridge.