Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Bensonhurst?
Chimney cleaning in Bensonhurst typically costs $150 to $290 for a standard wood-burning flue, with most homes landing near $195. That estimate includes a visual safety check at the top and bottom of the flue, a proper sweep, and a report on what we find. Gas-appliance flues cost less, heavily creosoted flues cost more, and every final price is set by the written estimate before any work starts.
Key Takeaways
- A standard chimney sweep in Bensonhurst runs $150 to $290, with the average around $195.
- Bensonhurst’s mix of early-1900s brick rowhouses and postwar semidetached homes means flue condition varies widely from block to block.
- A level 1 inspection is usually bundled into the sweep. A level 2 inspection adds $95 to $250 when a camera scope is called for.
- Heavy creosote or a flue with bends and offsets can push cleaning into the $250 to $375 range.
- The estimate is free and the written estimate sets the price. Call (855) 551-0049. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
We get a lot of calls from Bensonhurst homeowners asking a version of the same question: what will this actually cost? The honest answer depends on your flue, not on a flat menu price. But you deserve a real number before anyone pulls up, so here it is in ranges you can plan around.
Chimney work is what we do, and only chimney work. That focus matters when money is on the line. A generalist contractor who does roofing and siding on the side will clean your flue and leave. A dedicated chimney company reads the flue, checks the crown and cap, and tells you what the sweep turned up before rest of the system fails. That’s the difference between a $195 visit and a $3,000 repair three winters from now. If you want the wider picture of what we handle, start with Chimney Sweep Bay Ridge.
Chimney Cleaning Cost Breakdown (2026)
Here’s how chimney cleaning pricing breaks down for Bensonhurst households this year. These are typical ranges, not promises. Your written estimate is what counts.
| Service | Typical Range | What It Covers |
|---|---|---|
| Standard chimney sweep (wood-burning flue) | $150 – $290 | Bottom-up sweep, brush and rods, firebox cleanup, visual check of flue interior |
| Sweep on a gas or pellet appliance flue | $110 – $210 | Vent cleanup, appliance connection check, faster job than solid fuel |
| Heavy creosote removal (stage 2 or 3) | $250 – $375 | Glazed or layered creosote requiring chemical treatment and multiple passes |
| Level 1 inspection (bundled) | Included with sweep | Readily accessible portions of flue, firebox, damper, and appliance connection |
| Level 2 inspection (camera scope) | $95 – $250 | Full video scan of the flue, plus attic and roof-level views |
| Chimney cap replacement | $195 – $425 | Cap removal, new cap fitted with Olympia Chimney or Gelco components |
| Crown repair | $350 – $850 | Sealing cracks or rebuilding the crown; the most common entry point for water |
| Flue liner restoration (HeatShield) | $1,400 – $3,200 | Ceramic resurfacing of a cracked or spalled liner without full relining |
| Full flue relining (DuraFlex) | $2,800 – $6,500 | New flexible stainless liner for chimneys with bends, offsets, or failed original liners |
What pushes the number up? Creosote staging is the biggest single factor. A flue that’s been swept every couple of years is a straightforward job. A flue that hasn’t been touched since a prior owner moved out five winters ago is a different afternoon, and we price it honestly. Flue geometry comes next. Bensonhurst rowhouses frequently carry interior chimneys with an offset or a slight bend, and those take longer to sweep correctly. Access matters too. A chimney on a semidetached home with a shared party wall sometimes means working from inside the firebox only, which adds time. And if the sweep uncovers a failed liner, damaged damper, or crumbling crown, that’s repair work on top of the cleaning. We separate those line items so you can see the cleaning cost on its own.
What Affects Chimney Cleaning Pricing in Bensonhurst
Bensonhurst has a specific housing stock, and it shapes what a sweep costs here in ways you won’t see on a generic nationwide price chart.
- House age and flue condition. The neighborhood’s early-1900s brick rowhouses were built with unlined or clay-tile flues. Some have been relined. Some haven’t. A flue that’s still on its original clay tiles needs a closer look during the sweep, which nudges cost toward the higher end of the range. Homes built after the war often have different flue construction entirely.
- Creosote buildup. Creosote is classified by thickness. A stage 1 flue – soot and light flake – is a normal sweep. Stage 2 is layered and crusty. Stage 3 is glazed and hard, and it needs chemical treatment before brushing, sometimes across more than one visit. Stage 3 pushes cleaning toward the top of the range.
- Interior vs exterior chimneys. Most Bensonhurst rowhouses have interior chimneys that run up through the middle of the house. That’s a good thing for draft, and usually a slightly easier sweep than an exterior masonry stack that’s exposed to the full swing of a New York winter.
- Flue bends and offsets. An offset in the flue is common in old rowhouses and makes the job slower. Rigid equipment can’t follow a bend. Flexible rods and, in repair cases, DuraFlex flexible liner systems let us work the whole run instead of turning the job away.
- Appliance type. A gas fireplace vent cleans faster than a wood-burning stove insert. A wood insert set into a masonry firebox takes longer because there’s often a bypass or baffle to work around.
- What the sweep uncovers. The cleaning itself is one line. If we find a cracked liner, a crown with a hairline crack letting water in, or a cap that’s rusted through, we quote the repair separately. Repair costs are what swing the total, not the sweep.
One local factor worth flagging: the freeze-thaw cycle in this part of Brooklyn is hard on masonry. Water gets into a hairline crown crack, freezes overnight, expands, and widens the crack a fraction more each winter. By the time it’s visible inside the attic, the damage is deeper than it looks. That’s why we treat cap and crown work as preventive, not cosmetic. The crown is where most water intrusion starts, and a $425-ish repair today beats a masonry rebuild down the road.
What Does a Chimney Sweep Actually Include?
A proper sweep is more than running a brush up the flue. Here’s what you should expect from any company quoting you a cleaning price in Bensonhurst.
- A pre-sweep check. Before any equipment comes out, we look at the firebox, damper, and appliance connection to confirm the flue is safe to sweep. A blocked or compromised flue is a different job.
- Floor and hearth protection. Drop cloths go down. Soot travels. There’s no reason for your living room to bear the cost of a sweep.
- The sweep itself. Brushes and rods sized to the flue, worked through the full run. Solid-fuel flues need this every year or so depending on use.
- A visual inspection. Level 1 by default. If the sweep reveals cracks, gaps, or signs of water, we recommend a level 2 camera inspection – priced at $95 to $250 separately, and worth it.
- A written report. What we found, what needs attention, what can wait. No pressure to buy anything the same day.
If your system needs more than a sweep, the chimney inspection is the honest starting point. An inspection tells you the real condition of the flue before anyone quotes a repair. We run the inspection first and price the repair second, always.
How to Save on Chimney Cleaning
Chimney cleaning isn’t a place to hunt for the lowest bid. A too-cheap sweep that skips the inspection or doesn’t clear the whole flue is money thrown away, and possibly a safety risk. But there are honest ways to keep the total down.
- Stay on a regular sweep interval. Annual cleaning for a wood-burning flue keeps creosote at stage 1 and avoids the chemical-treatment surcharge that comes with stage 2 and 3 buildup. A $195 sweep every year costs less than a $350 heavy-cleaning visit every three years.
- Burn seasoned wood. Wet or green wood produces far more creosote. Dry, seasoned firewood burns hotter and cleaner, and your sweep is faster because of it.
- Get the cap and crown checked while the sweep is happening. Bundling a small crown repair or cap replacement into the same visit costs less than a separate trip.
- Ask for a level 1 inspection with the sweep. Most cleaning prices already include it. Confirm before booking so there’s no surprise add-on.
- Get a free written estimate. We provide one before any work. Call (855) 551-0049 and we’ll talk through your flue, your appliance, and what a realistic range looks like. No charge for the estimate.
One more way to protect the money you’ve spent: address small problems while they’re small. A failed crown is a $350 to $850 repair. A failed crown left alone for three winters is a masonry rebuild, and that’s a five-figure conversation. The inspection is how you catch it in time. Our technicians have up to 11 years of experience reading exactly that kind of early warning sign.
Does Chimney Cleaning Cost More for a Dirty Chimney?
Yes. A heavily creosoted flue costs $250 to $375 to clean, compared with $150 to $290 for a routine sweep. The difference is staging and time.
Stage 1 creosote is soot and light flake, and a standard brush sweep handles it. Stage 2 is layered and crusty, and it takes more passes and sometimes a chemical solvent to break it down. Stage 3 is glazed and rock-hard, and a brush alone won’t touch it. Stage 3 requires a chemical treatment applied first, a waiting period, and often a second visit to complete the cleaning. That’s why the price climbs. It’s also why annual sweeps save money over the long run. A flue cleaned every year rarely reaches stage 3.
If your flue has gone more than a few years without a sweep, mention it when you call. We’ll price it honestly and tell you in advance whether to expect the high end of the range. Call (855) 551-0049 for a free estimate.
FAQs – Chimney Cleaning Cost
How much does chimney cleaning cost in Bensonhurst?
Chimney cleaning in Bensonhurst typically costs $150 to $290, with most standard wood-burning flues coming in around $195. Gas appliance flues run $110 to $210. Heavy creosote raises the range to $250 to $375. Call (855) 551-0049 for an exact quote. Estimates are free.
Is it cheaper to repair or replace a chimney liner?
Repair is almost always cheaper when the liner is only cracked or spalled. HeatShield ceramic resurfacing runs $1,400 to $3,200, while full relining with a DuraFlex flexible liner runs $2,800 to $6,500. If the original clay tiles are intact and only the inner surface has failed, resurfacing is the right call. If the tiles are displaced or the flue has a bend, relining is the honest recommendation. Call (855) 551-0049 to find out which applies to your chimney.
Can you clean my chimney today?
Same-day cleaning is often possible. Cleaning typically costs $150 to $290, and we’ll confirm scheduling when you call. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 551-0049 for a free estimate.
How often should a Bensonhurst chimney be cleaned?
Once a year for a wood-burning flue that gets regular use, which costs $150 to $290 per visit. A gas fireplace vent can go longer, typically every two to three years, at $110 to $210. Homes where the fireplace is used only occasionally can stretch the interval, but a level 1 check each year is still worth it. Call (855) 551-0049 to book a sweep.
Does the cleaning price include an inspection?
Yes. A level 1 visual inspection is bundled into the sweep at no extra charge. A level 2 camera inspection, which runs $95 to $250, is recommended when the sweep reveals cracks, offsets, or water damage. Call (855) 551-0049 to schedule.
Why does a chimney cap or crown repair cost extra?
Because it’s repair work on top of the cleaning, not part of it. Cap replacement runs $195 to $425 and crown repair runs $350 to $850. Both address water intrusion, the leading cause of chimney damage in this part of Brooklyn. We quote them separately so you can decide. Call (855) 551-0049 for a free written estimate.
Do you work on gas fireplace flues?
Yes. Gas appliance flue cleaning runs $110 to $210, which is lower than a wood-burning sweep because there’s no creosote to stage. We inspect the vent and the appliance connection as part of the visit. Call (855) 551-0049.
Book Your Chimney Cleaning in Bensonhurst
You have a range, a breakdown, and a sense of what drives the number. That’s what a pricing page should give you. The last step is the one that matters: get your flue looked at before another winter runs through it. Chimney Sweep Bay Ridge is a chimney-only company. Cleaning, inspection, cap and crown work, chimney repair, and fireplace repair all sit with the same team, which means no handoff gaps between the sweep and the fix. We work with professional-grade brands like Olympia Chimney, Gelco, Famco, Copperfield, HeatShield, and DuraFlex, so the material matches the job.
Call (855) 551-0049 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 11 years of experience, and every price is confirmed in writing before we start.
Pricing reflects the Bensonhurst market as of 2026. Chimney Sweep Bay Ridge offers free estimates – call (855) 551-0049.
Written by the team at Chimney Sweep Bay Ridge.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Rosa Herrera"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Vikram Patel"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Jessica Wong